Picture has blue shadow/trail? sony KP-53HS10

rerwe

There are no fan in this tv.This tv most common problems are the dead convergence board parts have problems,picture have colors lines R,B,G out of alignment,have colors shadows,and 3D pictures.The convergence board must have it 2 STK convergence ICS and some or all it resistors to be replaced to solved convergence problems.The problems u discribing,it a starting point,just the convergence problems,have not take it effect yet.Sooner or later ur tv will have the convergence problems.

Look at attached photo--if it is what you have you have a convergence problem.

The KP-53HS10 uses two of the STK-392-020 convergence chips.

Both will need to be replaced and the set adjusted--parts cost on ebay is less than 20 dollars--repair consists of two things--getting at the parts and then replacing them--chips are soldered in so you need to be able to un solder them and solder the new ones in.

LET ME KNOW IF YOU HAVE QUESTIONS-I am here to help.

If this has helped out, rate this solution as I do this here for free.

SD TECH




Second picture:

The problem might be the Convergence circuit went bad, generally there are 2 chips (part# starts with STK392 - something) that will need to be replaced, it involves de-soldering and soldering some tried doing themselves and made it worst. A local TV shop may charge from $300 to $475 depends on the labor service call and parts.

Good luck
N Sabre

On this TV there is only one input for any HD resolution. Input # 5 is the component input i.e. red/green/blue cable. Just get the correct cable and match colors from cable box to TV this will allow the TV to display 1080i resolution ( only one this TV supports ). FYI you will also have to connect the red and white cables to the appropriate inputs to get any sound because red/green/blue connectors are just for video display not sound. Once your connected you'll be able to access video # 5 be sure to set your cable box to 1080i resolution also. I hope this helps later J.

You TV missing Green color ratio to produce correct colors in picture. It might needs service and adjustments in Video section .

Try adjusting the setting of "hue" control of TV.It might be the wrong setting & the ratio of red hue could be more than the required one.

Sony
Model # KP-53HS10
Serial # 9718217
MFG 2000

Plugged in TV. Timer Standby Light just flashes continusly. No Picture and No Sound.

does the timer light blink? how many times pause then blink again?

Sony Too green,red or blue

http://www.somelifeblog.com/2007/06/sony-projection-tv-red-line-repair.html