Looking to set up security for belkin 54g wirelrss router

Please enter the IP address of the Router in the internet explorer and enter the user name and password of the router.(admin, admin). When the windows will open, you can see the wireless security. When you click on that you can see the security key. Other wise you can change the security key.

check the wireless settings of the router .
Make sure that you are typing the correct network key if your network is secured.
May be you will need to open the ports on the router.
Click Here for more information

1. Type http://1912.168.2.1 in your browser This gets you into the router's configuration

2.Look for the tab that says wireless settings or something similar
3. Look for security tab
4. Secure the router using one of the security schemes provided...whatever you use remember and write it down somewhere or you will have to reset your router if you forget your password and want to make changes to the router's configuration.

Easiest wsay is to connect via cable and go into the configuration pages and set the security from the menu. Discoonect and then go into the wireless network settings on the laptop

connect your router to computer with ethernet cable.
Then you can access it with following link.
for belkin routers http://192.168.15.1
for other routers
http://192.168.1.1
or
http://192.168.0.1


type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.Click on wireless and If you want secure router then enable WEP security then add new code it is your password key for connect wi fi.
Let me know if you need further assistance.

Go to the setup page for the router (IP 192.168.1.1) and set up the WPA-PSK [TKIP] security. It will allow fairly simple setup, and only provide the pass code to house members.

You set your security by enabling WEP.

When you get in the interface to configure WEP, set a pass phrase. Write down the 3 numeric keys it generates. Then connect to the wireless using your laptop, etc. When it asks for your passkey, do not enter the pass-phrase; enter one of the three keys that were generated by the router. That's the biggest mistake people make when trying to get wireless to work.

try accessing the routers address in internet explorer and looking for the network key in the wireless security settings. Linksys uses: 192.168.1.1

Do a google search for belkins router address

Or try using the reset button on the back of the router to reset the security settings.

Hope this helps

hey what you can do is you can reset the entire router... by using the reset button on your belkin router... Or else you can also access the router by using the following IP address in the internet exlorer...

try 192.168.1.1 or 192.168.1.0 & then go to the wep settings & reset the router or change the password for the router...

you may need to set up a security item...can't remember what it is, but you need to set up a password as well, to make the network secure