Leica ? Disassemble/ Clean / Reassemble

Pretty much all bolt action bolts work the same. You need to relieve the spring force. That means pulling back on the cocking knob. The head will come off easily then. You need to have the bolt in the exact condition it's in when cocked, cocking knob back, to disassemble it. Reverse that to reassemble.

Possibly you have an overheating GPU or CPU problem. If you can do it, then disassemble the laptop and:
- Clean up everything (use canned air),
- Replace the cooling pad or cooling paste of GPU (if applicable) and CPU,
Reassemble the laptop.

Before you disassemble this laptop, you can check the air inlet, air outlet and the fan, and clean them up using canned air. I hope it solve the problem.

possible carb/intake issue - 1.remove /clean air cleaner -test 2. clean carb - test 3. remove carh assembly thoroughly clean disassemble replace bad parts with rebuild kit, clean all areas reassemble - test

Don't even think of disassembling it yourself!!!!!! Take it to a professional camera repair man and save yourself allot of money. I guarantee you that if you disassemble it yourself, you will not be able to reassemble it and the repair man will charge you much more then if you just brought him the lens in the first place.

Why do you think that the lens needs to be internally cleaned in the first place? It is very rare for so much dirt to penetrate the lens's interior that it actually affects the quality of the photographs. Don't over react to a few specks of dust between elements. The most important element to keep clean is the exterior surface of the rear element because that is where the light is most concentrated. Let a camera repair man tell you if your lens really needs such a drastic approach.

dimitris, use brush to clean hair and don't open the machine.

It is possible for someone to disassemble binoculars to clean etc. But if you are not experienced, there is a high chance it will be out of focus once you assemble it. The vision might even become blurry.
So I advise you to get it serviced by a professional.

If it is salt, then it's water soluble so just use a damp cloth.

It's not something you do. It's a serious job as you will just break them or ruin the alignment. I will clean them for you for $150.
Regards,
James (718)578-5231

I am trying to get Leitz binoculars repaired. Do you know where I can send them?

Ash

I don't know about disassembling binoculars. However have you tried drying them out, either in a "dry box" or by using silica crystals?