3 PANASONIC TVS HOOKED UP TO CABLE SYSTEM AND ARE ON 37" PANASONIC TH-37PX50U WORKS FINE BUT THE OTHER 2 TVS DO NOT WORK. THE CABLE SYSTEM HAS BEEN CHECKED TWICE AND WE ARE TOLD IT IS OK BY TIME WARNER CABLE.

From what I can tell the EUR7627Z60 was originally shipped with the following Panasonic products: TH-37PX50U, TH-37PX50U, TH-42PD50, TH-42PD50U, TH-42PX50, TH-42PX50U, TH-42PX50UA, TH50PX50, TH50PX50U, TH-42PD50, TH-42PD50U

Here is the manual for the Panasonic: TH-37PX50U/TH-42PX50U/TH-50PX50U:

Panasonic TH 37PX50U Operating Instructions Manual

Best of luck!

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Line faults to all LCD screen are similar, irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

use the menu button on the tv its self. it will let you go to all the menu setting and tv signalk settings.

This type of fault to most Plasma Displays are due to its energy recovery section circuit.

Contact the authorized dealer for Panasonic at your town.

Must check tv carefully for tv images burn in problems,plasma tv have that problems alot.This tv have major issues are power shutdown alot and power supply will not sustance and flashes it power light indcation.Have to unplug awhile like an hour replug back to get tv to work again.If u have chance to used it like 5 hour a day like for a week have warrenty for a week for a return it and get 95% of ur money back.Used it for a week about 5 hrs every day no power shutdown and no power LED light indication flashes i whould buy it.

Hi dennisreno,
You should be able to set the tv back to factory default settings from the menu.
I will see if I can find the user manual and give exact directions.
Let me know if you find the reset.
Lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

probably your cable box, request another one from your provider

Check the cable line thats attached to the bad set on another set side by side. If the other set still has no channels your going to need to trouble shoot or replace the tuner control bad and the tuner assy.

try moving the image with the adjustments.... wont work? change the 100uf 200volt filter just ahead of the flyback.