Delco unlock procedures

On you tube Go here for more Info.http://audioxpress.org/delco-radio-theftlock-unlock-codes/ WE CAN UNLOCK YOUR RADIO IF ITS A DELCOLOC II OR A DELCO THEFTLOCK RADIO

Does the radio say "LOC" or does it read "000"? Which AC-Delco radio do you have? Are there 5 or 6 pre-set buttons for selecting a station?

Did you consult your Owners Manual? There is a procedure the dealer can do to unlock the radio, but I know how to get the unlock codes for free.

re: 2000 Chevy astro van delco radio unlock code 682695.

Good luck and please flag if HELPFUL". Thanks!

How to Unlock a Delco Radio - Instructions

1) Obtain the six-digit dealer code - yours is above. ( this doesn't apply: Contact your local GM dealer. If you explain the situation, most will provide the code to you. If they are not willing to provide the code, contact other GM dealers until you find one that will help you

2) Turn the ignition key to the "ON" position, without turning the engine over. Hold the preset buttons "2" and "3" for 10 seconds. The radio will display a three-digit code. Write this number down and then quickly press the "AM/FM" button. Three more digits will be displayed. These six numbers are the serial code for your radio.

3) Call the GM assistance hotline at 800-537-5140. Follow the prompts and select the brand of your vehicle. Enter the six-digit dealer code and then enter the six-digit radio serial code. The automated system will provide you with a four-digit code to unlock your radio.

4) With the ignition on, use the "Hour" button on your radio to input the first two numbers of the four-digit code. Use the "Minute" button to input the last two digits. Press "AM/FM" to set the code. The radio is now unlocked and ready for use.

(from link: http://www.ehow.com/how_6168368_unlock-delco-radio.html / By Leonardo R. Grabkowski, eHow Contributor)

Here's a related video:
http://www.youtube.com/watch?v=XO2UuBO9llY

gumtree.com

Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.

Instructions:

1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.

Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device.

Instructions:

1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
6. Call the Delco radio automated customer support line at 1-800-537-5140.
7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
8. Enter the number 139010 into your phone and then press the "*" sign.
9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
10. Write down the four-digit code given by the automated voice.
11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.
    

Also can check your Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:

1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.

Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device. jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:

1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
6. Call the Delco radio automated customer support line at 1-800-537-5140.
7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
8. Enter the number 139010 into your phone and then press the "*" sign.
9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
10. Write down the four-digit code given by the automated voice.
11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.
    

Also can check 1999-Pontiac-Firebird-Owners-Manual (page 163), there are several information about to lock and unlock.


Hope this help (remember comment and rated this).

Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:

1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.

Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device. jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:

1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
3. Write down the two- or three-digit code that appears in the LED display.
4. Press the AM/FM button on the radio.
5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
6. Call the Delco radio automated customer support line at 1-800-537-5140.
7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
8. Enter the number 139010 into your phone and then press the "*" sign.
9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
10. Write down the four-digit code given by the automated voice.
11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.
    

Hope this help.

You will need to take it to your local dealer for them to pull code and call Delco for the unlock code,This usually takes about 10-15minutes.Make sure they give you the unlock code so you could use it for that radio if you lose power to it .

1 have h3 hummer and replaced the radio (ac delco) and is locked,i need to unlock it

need radio code for 98 booneville supercharge delco radio

There is a code. This usually happens when the battery dies, when you disconnect the radio or disconnect the battery. Unfortunately only the dealer or delco repair shop can unlock it.
have a great day!