How do I adjust the tracking epic t 40 treadmills

epic view 550 treadmill video 2 - YouTube

? 2:08
https://www.youtube.com/watch?v=fSIuoh_bZN4
Mar 9, 2010 - Uploaded by Epictreadmillowner
epic view 550 treadmill video 2 ... ICON Canada doesn't really support this and the independant technicians ...Epictreadmillowner 1,181 views.

Epic View 550 Treadmill Review - YouTube

? 3:02
https://www.youtube.com/watch?v=kNiFOcrV9r4
Nov 29, 2012 - Uploaded by Treadmill Review Guru
... .com/epic-treadmill-reviews/epic-view-550-treadmill-reviews-ratings/ ... Nordic track has the track and google maps by i-fit you can download and run anywhere ... The review says it doesn'thave the track/lap but it does.

Epic View 550 Treadmill video 3 - YouTube

? 1:59
https://www.youtube.com/watch?v=YjqgZS-1qlw
Mar 11, 2010 - Uploaded by Epictreadmillowner
Epic View 550 Treadmill video 3. Epictreadmillowner ... I have had 3 different console units, and now the tv doesn't work either!

Epic View 550 Reviews - MyTreadmillReview.com

mytreadmillreview.com/epic-view-550-reviews-2

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

We have a diagram and plenty of parts for your model. Please use the following link and have your serial number available.

400 Series SPORTSMITH net

motor brushes are bad. when they wear out, the motor loses torque and draws more amps. they can be replaced fairly easily once you get the motors out.

please LUBE the deck belt with WD-40 or grease . and try to loose a little the deck, the idea is to lift- 2-3" max.
Of course is time too, to maintenance Motor

The model # is on the bottom frame member. It begins with EPTL. With that # you will be able to order parts.

On my Epic you can adjust the belt tension by using an allen wrench in the holes on the end of rails. Tighten 1/4 turn on each side and see how the tension is. Repeat another 1/4 turn if necessary.

There should be adjustment screws on the back left and right sides. The screws will be horizontal with the tread, and probably need an allen wrench to tighten. If the tread runs straight, tighten each side 1/4 turn at a time to keep them even. Check the tread after each adjustment, and stop as soon as the tread quits slipping.

Make sure treadmill is running when you adjust belt. The treadmill belt tracks as the belt goes around. I usually put machine on 2-2.5 if belt is not rubbing instantly. If belt is already against plastic, turn adj. counterclockwise on the opposite side about one full turn. You can usually move belt with your foot to see if it aligns any with turning on the treadmill. Once belt is not rubbing, turn treadmill on and continue alighing the belt.

Your treadmill is trying to tell you its due for a tune-up!

determine which side is off centered

If the tread is migrating from the left you need to adjust the tension adjustment on the right and side of the roller and make it tighter

Most adjustments are made by turning a set screw that moves the idler roller ( the roller that is at the end of the tread mill which is where you first get on)

TO ADJUST:

1 TURN THE POWER OFF AND UNPLUG AT WALL OUTLET

2 Locate the adjustment screw( remember you will adjust the side opposite the migration to tighten the roller)

3 manually force the treadmill belt over toward the proper path( I do this by taking my hand and sliding my fingers under the belt and lift the belt as I hand roll it

4 Turn the adjustment screw counter clockwise one revolution

5 plug in then turn on and see if it stays in place

6 Keep repeating the process ( steps 1,2,3,and 4 )