Hooking up vizio sound bar no sound to bar - Vizio Televison & Video

1. Plug in the power cord.
2. Plug in the optical cable from your TV to your sound bar.
3. Turn on your TV.
4. Turn on your Soundbar.
5. Check the audio on your soundbar and make sure it's set to the right input.

Guide attached:

Read the user guide that comes with the sound bar. The bar has an optical link and RCA input jacks. The Auria TV should have RCA output jacks, so get a paired cable set with red and white RCA plugs on both ends. The input button on the sound bar will select the connected input when pressed.

Have you checked your sound settings on your TV? It may be set on TV speakers.

If the TV and sound bar have an optical connector, then get the optical cable to connect the two. If not then use the audio out jacks on the TV and don't forget to change the audio set up to switch the sound to the sound bar.

I had the same problem, no sound from tv to the sound bar. I hooked up the output for sound from the sound source, your cable tv box or satellite receiver and ran it to the sound bar, and then received sound.

You need a 1/8" stereo jack to rca....can get on at walmart....hook it from your headphone jack on your pc to the input on the sound bar....input 1 or 2....make sure you have the right iput selected for the sound bar and you should be in business

Why not ? It doesn't know what the source at the other end of that RCA or digital cable is.

Picking the VSB200 as an example.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Vizio-VSB200-Speakers-manual/id/23494ag923/t/2/

The manual shows connections to just about anything.

Not knowing anything about YOUR receiver, you MIGHT be able to draw digital audio out somewhere. Analog audio would be available at any Tape Output. Your receiver

You can use the original cable just plug the sound in and thin the part hooks up to your xbox take the cover off so u can hook your hdmi back up thats it.

Hello, Daniel Busa with Dish Network's customer service try these steps if the remote will program this will do it

I had a similar problem. I tried all the TV settings, but still it would not work. I plugged the sound bar directly into the cable box (AT