Sony kf-60we610 thermal fuse location

That is a Thermal Fuse. IT is behind the area where the lamp is. How to change the thermal fuse on sony kdf e60a20

This video is for a different model but its the same idea as yours.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Try this site too. Electrohelponline

This page shows Sony lamp location and bulb replacement.
Sony DIY Bulb Guide.

The XL2100 Lamp assembly is located behind the grill, under the front screen. Thumbscrews on left and right loosen and the panel pulls off.

Open Lamp access door by loosening the thumbscrew on the front. The lamp is behind the door and attached by two mounting screws. The mounting screws require an "Allen" or Hex key.

Never attempt to access the bulb or open the door when the bulb is hot. Allow 30 minutes to cool.

Look for specific LED indicator codes on the front of the TV. An explanation of the most likely fault is in your Sony user's manual. Links to free Sony user manuals are also on the link above. Lots of instructions regarding safety, mercury disposal, removing the lamp.

Do not buy a bulb and waste your money if any Sony TV Optical Block or Optical Engine Faults are or were visible before bulb failure.

easyab

Check the manual If you dont have one , go to the Sony Consumer site and D / L one

Your lamp (back lighting) is burnt out and need replacement. The instructions are in your manual

check the tiny fan directly above the lamp for excess dust or if it spins at all

Lamp is located at lower front of TV and you need to remove lower front speaker grill to get access there, remove lamp cover then pull out lamp.
Click Sony Support to download Lamp replacement procedure guide that has all necessary details for KF-60WE610 TV.

Hi,
Click Sony Support to download Lamp Replacement guide for KF-60WE610
It is PDF file and acrobat reader requires to read it.

Jeff, did you look at the Sony web site? They had a problem with 9 different TV models that were from 2003 and 2004, KF-42WE610, KF-50WE610, KF-60WE610 and 6 other models.
This is what it states: It haas come to our attention that a limited number of Grand WEGA rear projection TV's may exhibit warping to the lamp access door. In rare cases, some additional components may also become damaged as a result. and so on........
You probably have some components melted on the inside around the lamp. I have a 42 inch and I just replaced the lamp at Christmas and the door was melted shut. This is the second lamp that I have replaced, the door was starting to melt the first time. They never sent me anything about this problem, and as of today I am still trying to work something out with them. The repair shop who has it told me that it can't be repaired. The parts that are melted are not in stock and they don't make them anymore. They are supposed to get back with me and make me some kind of offer.
They will only fix this problem through March 31, 2009.

Hi,
If you need XL-2100U Lamp for your Sony Grand Wega, its available on Sony Accessories and its price is approx $200

Here is bit details of required part from Sony web site...

Part Number is ... A1606034B LAMP BLOCK XL-2100U
Compatible Models

KDF-42WE655

KDF-50WE655

KDF-60XBR950

KDF-70XBR950

KF-42WE610

KF-50WE610

KF-60WE610

Need further help, let me know.