How do i set caller id of euroset 2025c - Siemens Euroset 2005 Corded Phone

To save caller ID with a name in Panasonic KX-AT7730, you need to follow these steps:

Press the "Program" button on the phone.
Dial "9" to enter the "Caller ID" setting.
Dial "1" to enter the "Caller ID Memory" setting.
Dial the memory location number (0-99) where you want to save the caller ID and name.
Enter the caller's phone number using the keypad.
Press the "#" button to move to the next field.
Enter the caller's name using the keypad (use the alphanumeric keys to enter letters).
Press the "#" button again to save the entry.
Repeat steps 4-8 for each caller ID you want to save.

Note: Caller ID service must be enabled on your phone line for this feature to work. Also, make sure you have enough memory locations available in your phone's memory to save new caller IDs.

Lift the handset
Press the set key
Press the repertory key (under which speed dial button like to store)
Enter the number
Again press the set key

Press Set followed by 3, enter the time now in 24HR format, and press Set again.

You need to change the Pause time from 3 second (Default) to 1 second. For this First of all your have to
1- press the "set" key on the Euroset-2025 set and
2- then dial 1020.(1020 for 1 second pause) (1021 for 3 second pause)
3- and "set" key again.
Now you can use the conference feature of set.

Caller ID is a staple in every iPhone. Your service provider may have blocked your Caller ID, so make sure to check with them first. To check if your iPhone has enabled the Caller ID setting:

1. Go to settings.

2. Click on Phone.

3. Click on Show my Caller ID, and select Yes.

No caller ID. What to do?

The Star Talk Flash is a voice mail prduct. The caller ID feature is a phone system feature. If your system is a norstar CICS or a MICS the caller ID will work only if you have the caller ID capable central office circuit packs installed. Look on the card and see if the label has "CLID". If it dose there is also additional programming required for each set under.... terminals &sets/telco features/featue assignments/show line/caller ID...set:Y. You also have to program (under sets) /telco features/caller ID: Y.

Hope this helps.

Telephone settings
Select Menu > Tools > Settings > Phone.
Select from the following:
• Call — Define general call settings.

Call settings
To display your phone number to the person you are
calling, select Call > Send my caller ID > Yes. To let
the network determine whether your caller ID is sent,
select Set by network.