Directv Plus DVR DTV Receiver / 100-Hours Video Recorder Logo

Related Topics:

A
Anonymous Posted on May 30, 2014

Why will my directv dvr not power on - Directv Plus DVR DTV Receiver / 100-Hours Video Recorder

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

How do i reset my dvr

If you stuck in CCTV DVR Password Reset process. just visit
CCTV & Networking Technical Support Channel on youtube.
Here is the link:-
CCTV Networking Technical Support
0helpful
3answers

Why can't i see 1080p programs on my directv hd dvr? The test on the hdr says my receiver doesn't receive 1080p. My tv is a Sharp LC-62C42U which is suppose to receive 1080p!

Your DVR can't detect whether your TV can do HD or not. If the message is stating that your receiver (which is your DVR) can't receive 1080P, then you'll need to contact DirecTV for assistance. You may need to replace your DVR.
1helpful
1answer

Philips DSR708 DirecTV DVR hangs up after power up

Is this a new issue that has shown up on the receiver? If so then you might have a bad hard drive in the receiver causing it to hang on boot up. Also these units require two inputs from the satellite antenna so that could be another possibility.
0helpful
1answer

Problems programming DVR remote to TV

If your DirecTV remote is in SAT mode and the power button isn't turning the receiver on and off, you will likely need a new remote. There isn't suppose to be any trick to getting the power button on a remote to work. However, only DirecTV tech support can confirm this. I would give them a call right away.
0helpful
1answer

I want to load video from my DirecTV DVR onto USB and vice versa.

From my experience, this isn't possible due to copyright reasons.  If your DVR has a USB port, it is usually meant for flashing the BIOS with updates by a technician.  Since this is a rented DVR from DirecTV, they probably have the USB port disabled since they can update the DVR from their end.  All you can do is search Google using your model number since we would be liable for guiding you how to "hack" into DirecTV's property.
3helpful
1answer

Directv dvr will not power on. The record light

Unplug the DVR for about 20 minutes and then plug it back in. If that doesn't work its probably time to contact DTV for a replacement.
0helpful
1answer

My Directv DVR receiver will not stay on it is blinking yellow??

Unplug it from the power for about 30 minutes and then try again. If it still doesn't work I would call DirecTV and discuss getting it replaced.
0helpful
1answer

Directv to Dish

Can Not Be Done. Dish and Directv use different encoding software.
0helpful
1answer

DIRECTV HD DVR REMOTE CODES WILL NOT OPERATE DVR

If you turn off power saver on your tv it should correct the problem...
0helpful
1answer

Directv dvr

unplug all the cables except the video out and the power cord. if i loads and stays on after the 14 min. there is a cabling or dish issue. if it turns off the dvr is bad
Not finding what you are looking for?

186 views

Ask a Question

Usually answered in minutes!

Top Directv Televison & Video Experts

Alexander

Level 2 Expert

171 Answers

Ngoro

Level 3 Expert

3523 Answers

john h

Level 3 Expert

29494 Answers

Are you a Directv Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...