Acuitus 5015 CMOS battery low message - Zeiss Acuitus 5015 Keratometer

Contact Carl Zeiss direct. That is well beyond the scope of Fixya, sorry.

https://www.google.com/search?q=Zeus%27s+Acuitus+5015

..

i have the manual and the belt, pls contact at [email protected]

marcelo

These equipments use a sbc492 by Aaeon motherboard, and usually they shows a message like "Cmos battery Low".These motherboards use an RTC M48T86PCI with a internal lithyum battery, and just replace that component.Other problems may occur, like damaged slots, and or oxidation, but generally the 486 architecture is a huge way to work,Only clean change the memory(dimm 128 x 100mh)and enjoy.A simple way is a replacement with a new one by Intel, still easy to find in some inventorys, i have many in USA who can suply.

hope to solved

comunicate conmigo un this Correo [email protected]

The batery is a integrated circuit that is soldered to the Mother Board. You should disolder that circuit in order to replace it

I need the same. I found in Ebay

Hi! Insert a new battery. Download user manual for CPU board (NuPRO591).Connect 5pin DIN keyboard. Switch On. Del. In BIOS Features Setup PCI/VGA Palette Snoop: Enabled. In Standard CMOS Setup LCD&CRT change display interface.

The problem is in the mainboard, look for j conectors, and try to see if any is released.They control the step motor who can make the camera focus

Hi Mariela where you from, maybe i can help you.