Dura heat wick to fit corona 23dk heater - Corona 23-DK Compact Heater

Here are some general operating instructions for the Corona SX3 kerosene portable heater:

1. Fill the heater tank with kerosene. Make sure the heater is placed on a flat and stable surface before filling.
2. Turn the wick adjustment knob to the lowest setting.
3. Open the fuel cap and use a funnel to fill the tank with kerosene up to the maximum fill line.
4. Close the fuel cap and let the wick soak in the kerosene for at least 10 minutes before lighting.
5. After the wick has soaked for 10 minutes, use a lighter or match to light the wick at the top.
6. Adjust the wick height to the desired level using the wick adjustment knob. The higher the wick, the more heat the heater will produce.
7. Keep the heater away from flammable materials and make sure it is not placed near any open flames or heat sources.
8. Use the shut-off switch to turn off the heater when you are finished using it.

Unfortunately, I could not find a specific manual for the Corona SX3 kerosene portable heater online. If you have any other questions or concerns about operating the heater, you may want to contact the manufacturer directly for further assistance.

Fanco Kerosene Heater Wick #1 For Models 96; 9600; 100

https://www.amazon.com > Fanco-Kerosene-Heater-Wi...
Perfect fit for FANCO 9600 Warm Air Series Kero Heater...a little more costly than Dura-Heat aftermarket wicks and this one did not come with a new igniter ...

Fanco Kerosene Heater Wicks

https://www.kerosene-wicks.com > Fanco-Kerosene-He...
Kero-World replacement kerosene heater wicks for most models of Fanco Kerosene Heaters.

• 
  

  Fanco Kerosene Heater Parts

  https://www.kerosene-wicks.com > Fanco-Kerosene-He...
  Find authentic Fanco kerosene heater parts. Fanco replacement parts for various models of Fanco heaters. Click your model number to view parts available.

Corona Model 23-DK Kerosene Heater - YouTube

$12.95 6th item down

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

the wick is round in this heater and may have to be cut for height. should be about an eigth of an inch below the top

I believe you will find the instructions on or in the package of the new one. I've seen many styles of replacement wicks at Walmart. Also the replacement instructions will be in your owners manual.

I just pulled my DK-23 out of storage today and have the manual. If you send me an e-mail at [email protected], I will scan the manual and send it back to you.

Steve Scalf

You send me the Corona 23 DK Manual and I will talk you into it. I need the new repair manual for our church. [email protected]

FOUND THE CORONA 23-DK OWNERS MANUAL!! http://www.managemyhome.com/mmh/lis_pdf/OWNM/L0711355.pdf

You must be very careful and follow the instructions exactly on these wicks. The pins must be inserted into the holes on the wick holder. It is also easy to install the wick holder upside down. Look for a small up arrow on the side.

You must soak your wick for at least 30 minutes, preferably 1 hour. I know it's tempting to light it right away, especially when you are freezing, but you must wait. Wicks work by using capillary action. The fuel must have time to soak in properly.

All wicks are NOT created equal. Buy good ones, under no circumstances should you buy the ones that Walmart sells. They **** and you will be changing it in a day or two. Home depot sells a decent one, but for the really good ones visit Miles Stair wick shop. He also has some good info to deal with condensation and moisture problems.

Also note these heaters will not work if they are dirty. They must be absolutely clean of all dirt and debris, every single part. Especially the parts that come in contact with the wick.

Regular maintenance, good wicks and good fuel will keep these heaters working.