HAVE A SHARP 52" LCD #LC52D65U AND I CAN'T FIGURE OUT HOW TO REMOVE THE STAND SO I CAN MOUNT IT ON MY WALL. PLEASE HELP ME

Check and replace its main power regulator board. It is best to replace it as card basis, rather than trying to make it repaired. Contact the authorized service center for Sharp, to get a genuine replacement board. To get more details, http://electronicshelponline.blogspot.com/

It will be expensive and time consuming, but it can be done. There are many web sites that sell replacement screens. Just google TV replacement screens. You should download the service manual for your TV from Sharp's website before attempting to do the repair.

are you on the right tv channel to veiw you satilite/cable

You can get a universal stand from shopjimmy.com. It attaches to the back of the TV just like a wall mount.

Power supply board have problems and the causes.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

This problems is not those 2 long LCD inverter boards problems,why did u replaced those 2 long LCD inverter boards?I fix this problems before for a 46" LCD Sharp Aquos L46D55U tv.This problems,it the Tuner signal board is dead.That the board,where the incomming broadcasting signal cable plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.

direct unplug

hookup tv with HD signal or off air antenna

there are some screws in the back.remove the screws and the base can be removed

did you figure this out? I only ask because I need the stand for my TV. Could you sell me yours?

Thanks

Anthony
[email protected]