I see myself when program opened, but during video call, the other person only see a black window. I see them fine but they see me. HELP Pleae!

hello, try to close all the quickcam software before you open skype. I think its a program collision. also check msconfig that no logitech program starts. click->start->run->write msconfig and click startup tab. uncheck all logitech. get back if it doe sent work

since the cam works fine during the video call problems might be in your network connections..try using a different service provider like gmail or yahoo for the same video call after checking your network connections.(if you dont know how to do it, then click on the browser's (internet explorer or firefox)tools, >options>restore to defaults in the first tab itself)..

Normal 0 This ptogram will eliminate your problem of the camera being busy or being used by another program. Really works great.

Double click on this site http://download.cnet.com/SplitCam/3000-2348_4-10500269.html
And then click on Download Now (3.5MB)

1. Install Splitcam saying yes to everything during installation including the any warnings.
   
   2. Then run the Splitcam program by double clicking the downloaded program.
   
   3. Clicked on "Video" at the bottom right of the program window and selected your cmera.

Note: This will result in your camera being switched on and viewable in the
SplitCam program.

4. Opened up Skype (or other messengers) and go to "Tools" then "Options" then "Video settings."

5. Also setup your “Audio” while you are there.

6. Selected "SplitCam Capture" as my webcam, then click on save.

7. Webcam image will appeared in Skype or what ever messenger you are using.

Hope this Helps. Bud

you nid software to do this..download free software and install it to your pc.

Normal 0 This ptogram will eliminate your problem of the camera being busy or being used by another program. Really works great.

Double click on this site http://download.cnet.com/SplitCam/3000-2348_4-10500269.html
And then click on Download Now (3.5MB)

1. Install Splitcam saying yes to everything during installation including the any warnings.
   
   2. Then run the Splitcam program by double clicking the downloaded program.
   
   3. Clicked on "Video" at the bottom right of the program window and selected your cmera.

Note: This will result in your camera being switched on and viewable in the
SplitCam program.

4. Opened up Skype (or other messengers) and go to "Tools" then "Options" then "Video settings."

5. Also setup your “Audio” while you are there.

6. Selected "SplitCam Capture" as my webcam, then click on save.

7. Webcam image will appeared in Skype or what ever messenger you are using.

Hope this Helps. Bud

you need to set cam up with skype follow instructions
please let me know if this helps if not we can try another solution and please don't forget to rate me

Go to TOOLS, then OPTIONS, and click on
Audio Settings
and set the Microphone and Speakers
to the computer Audio Card.
Then click on the Video Settings.
The camera if installed properly
will come up and show a picture.
Then on the bottom of the page click on Save.

quiero los drevers para istalar mi webcam se me estravio el cd de istalacion pero lo quiero en español como hago

You would be surprised at how many people don't realize that each application has it's own configuration screen.

It's not the end-users fault - like you said... the instructions could be a BIT more clear.

http://www.microsoft.com/hardware/digitalcommunication/downloads/default.mspx

On the one I just fixed, Skype would not even see the LifeCam. I had to go into the registry and delete the calls for the Lifecam in the run section. Open Regedit, back it up first then delete any referecne to Lifecam in HKLM\Software\Microsoft\current version\run and also HKCU\Software\Microsoft\Current Version\Run

Be careful to ONLY delete the referecnes to Lifecam. If you are nto familiar with the registry you can seriously mess up your file system.