Baby Gear Logo

Related Topics:

A
Anonymous Posted on Nov 12, 2013

Doreljuvenilegroup baby walker model number-wa030ayz. How do you remove the seat to machine. Wash it ?

1 Answer

V Try

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Feb 10, 2020
V Try
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Feb 10, 2020
Answers
1
Questions
0
Helped
289
Points
1

You can get everything off by following the instructions in the manual except the front bar holding on the cloth seat. If you look underneath you will see three white plastic rectangular tabs. Note that the holes are the same size as the plastic tabs, if you could turn the plastic tabs. They are all connected to each other by a 12” strip hidden inside the cloth. The trick is to go halfway between the center tab and one of the other tabs and put your finger between the plastic support structure and the 12” plastic strip. By gently pulling that out you can grasp the plastic strip. While holding that side out, go between the center tab and the other tab and do the same. With hands on both sides of center, you can easily rotate the center of the strip about 45° counterclockwise and the center tab will release. The other two tabs need to be rotated 90° then they will come out also. Wash and then reinstall. Hope this helps!

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Mar 02, 2009

SOURCE: Assembling seat of chicco dj baby walker

Possibly the worst instructions I have ever seen! However, I got it in the end. Reference the manual and follow these instructions. The padded seat folds over the the rigid backrest (c) (don't do this yet!). Start by dropping the front 2 rings through the slots, then, put your finger through the ring underneath the walker and pull (quite hard) until it comes right through and folds over so it can't pull back out. The seam of the padded seat fits into the groove where the ring slots are. repeat this for the next 2 and it should work itself out from there. Hope that helps!

Ad

Anonymous

  • 6 Answers
  • Posted on Apr 30, 2009

SOURCE: Chicco UFO baby walker seat damaged

go to your local retail store and find a baby walker just like the one that you have and explain your situation and ask for a copy of the manual. in the manuel, find and warrenty with the company and reapair/parts number and they will help you

Anonymous

  • 23 Answers
  • Posted on Sep 17, 2009

SOURCE: where in scotland can i buy a new seat for a

For spare parts you'll need to either contact Chicco direct or pop into a local stockist of Chicco products who should be able to order the spare parts in for you. Make sure you know the model or at least have a picture of the item so they know which one you need.

Chicco U.K. Ltd
Prospect Close
M. Lowmoor Road
Industrial Estate
KIRKBY IN ASHFIELD (NOTTINGHAMSHIRE NG. 17 7 LF)
(0044) 1623-750870
(0044) 1623-723880 (fax)
[email protected]

Anonymous

  • 12 Answers
  • Posted on Oct 15, 2009

SOURCE: Replacement console for chicco baby walker

Most likely! look through the items manual ,usually there would be anuber or web address! try those out!

Anonymous

  • 1 Answer
  • Posted on Mar 12, 2010

SOURCE: replacement seat for dj seventy baby walker

DJ spares may be obtained from Stork Talk on 01159 306 700, I just ordered a seat and it cost £22.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Evenflo Trail Tech Framed Baby Carrier: is it possible to machine wash ?

Question moved from Washing Machines category.

If you can remove the frame, yes, the fabric is machine washable. This one says it has a removeable seat.

https://safety.evenflo.com/rs/recalldata/gerryFrame.html

https://www.google.com/search?q=Evenflo+Trail+Tech+Framed+Baby+Carrier+remove+frame

..
Mar 18, 2023 • Baby Gear
0helpful
1answer

Removing seat from Safety 1st Sound n Lights Activity Walker

There's tabs on the underside of the walker that are holding the cloth seat in place. Slip the buckle through the slot. They go all the way around the walker seat.
0helpful
1answer

How to remove the seat cover of baby walker

Thank you Kelstar 69 & Christina for your explanations. Your words "do not twist the peg side" and "twist the SEAT until peg is turned and released" were just what I needed. I worked and worked at this until between you, it finally made sense. Appreciate it!
0helpful
1answer

How to replace seat in jetta beepa walker

Contact Jett's beeper manufacturers customer enquiries, they should be able to tell you who your local spare parts distributors are. I have changed similar material seats before and they usually just clip into place on the underside of the frame.Its a simple job
Aug 07, 2013 • Baby Gear
0helpful
2answers

How do i remove the seat for clean on safety 1st walker

Do not just pull the pegs as I have previously read, you have to unbuckle the other buckles then start with one side and twist the seat until the peg is returned and released from its slot..... P.S I know that my response is late but I would hope that it will help someone because I had a hard time figuring this out!
0helpful
1answer

How do I remove seat from safety first walker

Thank you kelcstar69 for your explaination! I was really struggling to get it apart! Made it so much easier! Thanks again :)
0helpful
1answer

Product # 45606 made in 1996. we have a bouncing safety first toy seat that looks like a car and the baby seats down into this middle seat. We cannot figure out how to put the polyester seat back in.

Remove the plastic ring by pushing each tab inward and pulling the top piece of the ring up. Find the buttonhole on the back of the seat and put it over the little knob. Then work the fabric around the outside of the ring, tucking it on the inside of the plastic tabs, all the way around. Then, with the talles tab at the back where the buttonhole is, line up the top half and pop it back on. The fit is very tight and the fabric will be held in place by the ring.
1helpful
1answer

Chicco UFO baby walker seat damaged

go to your local retail store and find a baby walker just like the one that you have and explain your situation and ask for a copy of the manual. in the manuel, find and warrenty with the company and reapair/parts number and they will help you
Apr 21, 2009 • Baby Gear
0helpful
2answers

Replacement seat for dj seventy baby walker

I would try contacting Chicco directly, or a local stockist of Chicco products. They should be able to get one shipped to you. I wouldn't have any idea of how much this would cost though!
Apr 01, 2009 • Baby Gear
116helpful
5answers

Assembling seat of chicco dj baby walker

Possibly the worst instructions I have ever seen! However, I got it in the end. Reference the manual and follow these instructions. The padded seat folds over the the rigid backrest (c) (don't do this yet!). Start by dropping the front 2 rings through the slots, then, put your finger through the ring underneath the walker and pull (quite hard) until it comes right through and folds over so it can't pull back out. The seam of the padded seat fits into the groove where the ring slots are. repeat this for the next 2 and it should work itself out from there. Hope that helps!
Not finding what you are looking for?

299 views

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

153 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...