Lost my installer cd for wrt160n v3 - Cisco Linksys WRT160N ULTRA RANGEPLUS WIRELESS N BROADBAND ROUTER

Linksys WRT160N Wireless Router installation

Hello Friend
Please open page with address 192.168.1.1 and open the router page with username= blank
password=ADMIN
Go to wireless tab and click on the security
Click on the secutiy box and enable this.
Set this to WEP or WPA
Enter the passprase\password which you want tas a password for your wireless network.

Enter these details
You can also check this user iterface here.

http://ui.linksys.com/files/WRT160N/v3/3.0.00/WL_WPATable.htm

http://support.linksys.com/en-us/support/routers/WRT160N

Are you trying to run the CD that comes with the router?
I think you can try to setup your router manually instead of running CD. WRT160N router has issues with the firmware so I will suggest you to upgrade the firmware of WRT160n router first.
See how to setup Linksys WRT160N router

Click the link below:

Linksys wrt160n

Click "Downloads"

Click the dropdown menu and choose version 3.0

Scrolldown and download the Setup Wizard that is right for you.


Rate my answer if this helped you.

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Try changing the Channel range

I think you are trying to install the router using the CD. This CD has a bug. Even if your computer is connected to the router , it will say the computer is not connected to the router and it will give you error 322 or 321.
You can install the router without CD also.
Make sure that your computer is able to go online through the modem only.
connect the computer and the modem to the router and open the set up page of the router.
On the set up page you can change the settings of the router according to ISP.

Click Here for step by step instructions

Look for the software in the specific product site.
thanks..

you can get updates and installations for your phone software here, they automatically load the drivers when you connect the phone to a usb port via the cable. http://direct.motorola.com/ENG/SoftwareUpdateSummary.asp?country=GBR&language=ENG&web_page_name=SUPPORT&strCarrierId=&strPhone=RAZR%20V3&strCable=Mini%20USB%20Data%20Cable