Craftsman mini tiller string break - Mtd Craftsman 4Cycle Mini Tiller

some primer bulbs come as an assembly and have two clips that snap into the housing others are bolted in with 2 screws if so remove the screws and make sure to take what is left of bulb to match up the new one

it could be the bowl nut gasket or the bowl oring either could be dried out or in the case of the bowl oring could be pinched

Manuals for many Craftsman tools are available here: http://www.managemylife.com/mmh/owner_manuals . Lots of tillers are listed just by searching for Craftsman tiller. If you can find the model number (usually on a plaque on the housing of the tiller), you can narrow down the list greatly.

I hope this helps.

Cindy Wells

Your situation is puzzling and in fact on the Sears site with your tillers' parts list, they state the manual is no longer available with no replacement either. See item no. 92 on parts list.
Here is the parts list and diagram if there are any help to you.
http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/All-Products-Parts/Model-917299370/0247/1508000/00010290/00001?blt=06&prst=&shdMod=
Don't fear. Here is a link to a 6.5HP Craftsman tiller that I also hope will help. This model is a close relative but has rear tines.
http://www.managemylife.com/mmh/lis_pdf/OWNM/L0912306.pdf

Craftsman part numbers will help on this search. Typically 3 digits separated by a '.' such as 345.45687

If you can find these, please re-post the question. :)

Craftsman mini tiller. Are you selling this unit, giving it away or what. Your information is somewhat meager to say the least.

Depending on model the hp is 1.4 hp

regular 30whd just like your lawn mower
Good Day.

http://www.alamia.us/honda_fg100_parts_s/777.htm