I have a child block on tv and i dont have the code to remove the block.is there anyway to take the block off?

How do I take child lock off my TV?"

How to Remove a Child Lock On TV

1. Get the TV remote control and push the "Menu" button and select "Options." ...
2. Select "Child Lock" from the "Options" list. ...
3. Choose the "Remove Child Lock" selection. ...
4. Enter the four-digit code that you used when you activated the child lock feature.

More items...

How to Remove a Child Lock On TV - Techwalla

most likely . go into smart tv settings look for application setting
go into this and remove youtube application.
However a smart child could use internet browser and www.youtube.com
http://www.mckeay.net/2008/11/26/blocking-youtube-with-a-wrt54g/
You could connect the tv to a router and block tcp port 53

Can the tv be reset to factory default , if it can this should undo the parental lock.
If not, contact a repairman who has experience of your make. I had a forgotten password on a technomate satellite receiver and the technician told me that the model I had was installed with ageneric code in case the user set code was forgotten.
Anyway, reset if you can and ask a tv technician if you cannot
good luck

If the previous user never used a child lock function, how do this now activated? Anyway, to reset this set, you have to know about the child lock code. There is some details about, how to unlock the child lock, its repair manual will have the procedure. Check this link. It has details about these matters to many brand TVs. http://electronicshelponline.blogspot.com/ Pull up older posts there, either by its left side bar, or see it in Timslide option.

Locate the manual for your television. Though slightly embarrassing, accidentally turning on the child lock to a TV is a common problem. The section In the manual about how to set the child lock feature will also explain how to unlock it.

Try a few "universal methods" for unlocking the child lock. Some televisions have a universal code built in for disabling the child lock --no matter what your code is. A common code is "0000."
Unplug your television for a few minutes. The internal battery of the TV is what helps remember what your code. If the TV is unplugged for an extended period of time, it clears the internal memory, which in turn will reset your child lock code

Unknown password--ITC008 chassis with TV off press and hold volume down on the front of the tv and clear on the remote for 5 seconds

sony 36 inch tv re light appears in standby the tv turns on then turn off.

Go throught the remote menu

You will for sure need to borrow a remote from someone to do this. But I will give you the way to unlockit just in case you can get one. Philips sets use a four digit code to control the v-chip. The override code for Philip sets is 0711, although it may say "Incorrect code" the first time to trick you. If "Incorrect code" is displayed, simply enter 0711 again. To use it hit the MENU key to get to the menus. Go up or down until you reach AUTOLOCK or SMARTLOCK, depending on the model, and push the "right arrow" key on the remote. Enter the override code, and enter it a second time if it says it is incorrect. Once in the AUTOLOCK or SMARTLOCK menu, go to BLOCK, and push the "right arrow" key. Go to BLOCKING OPTIONS and press the "right arrow" key. Go to MASTER DISABLE and press the "right arrow" key so that it says "MASTER DISABLE ON". The v-chip is now reset. Good Luck

Press vol-on tv& child lock on Remote together. Press mode on Remote using channel +/- to select child lock select new pin press mode E