I have a Smasung remote need codes to program for curtis mathes TV Answer This...

They should have your Curtis Mathes tronics tv/vhs codes at the link below: http://www.curtis-mathes.com

Hi rosecorbin,my name is Mike Houston of DISH Network and I wanted to give you the codes toprogram your remote to your Curtis Mathis TV. The codes are; 516, 573, 680,652, 665, 667, 668, 670, 674, 659, 590, 650, 664, 708, 641, 645, 703, 712, 526,660, 654, 658 and 506. You will need to push and release the TV button and pressthe 3 digit code and press the # button, I will also leave the steps for a PowerScan. http://www.dishnetwork.com/SupportSection/sat-autotune

There are two different lists of 3 digit remote codes for GE remotes. How old is your remote?

For a remote released before Aug 2002:
Sharp 004, 006, 012, 029, 095, 111, 112, 113, 122, 171, 173
Sylvania 004, 006, 008, 019, 062, 068, 069, 074, 075, 076, 077, 088, 116, 161,
183, 184
Curtis Mathes 000, 004, 006, 015, 105, 162, 171

For a newer remote:
CRT Televisions (only)
Sharp 004, 006, 009, 020, 063, 079, 095, 111, 112, 114, 122, 123, 124, 173, 226, 266
Sylvania 004, 008, 009, 062, 068, 069, 074, 075, 076, 077, 133, 135, 141, 161, 163, 189, 198, 227, 456
Curtis Mathes: 000, 001, 004, 006, 009, 015, 031, 049, 105, 109, 162, 171, 130, 358

LCD TV Sharp: 063

For combination units, please see the manual at the URL below.

The full code lists are here: http://www.jascoproducts.com/support/universal-remote-codes.asp .

I hope this helps.

Cindy Wells
(Note: the codes included in the remote are limited to those for TVs released 6 months or more before the remote was programmed. If your TVs are newer than the remote, you probably need a newer remote.)

Try
http://www.remotes.com/

Thanks
Frank
Live-Tech
1-888-361-8511
http://www.mylive-tech.com.

Your TV code is different for every REMOTE brand. Make sure of the brand and use their code. If you can't find the code, buy a universal remote for $5 to $7 and use supplied codes. Hope this helps.

Try these codes for your remote and TV. The are the Zenith codes for a Curtis Mathes TV.

CURTIS MATHES.....002 103
............................. 112 502 506
..................... 512 601 701 704

These should work.

Regards,

Mike

I am having the same problem you find out anything?

how program my control sanyo for tv curtis mathes

I own a One-for-All universal remote, and my booklet says the setup code for a Curtis Mathes TV (without a built-in DVD or VCR) is one of the following numbers: 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0702. I can not guarantee these numbers will work with your remote, but it is worth a try.

i have a curtis mathes tv called an itronics and i need a remote controll code for it