Need region code for wharfidale L1911W-C - Wharfedale Televison & Video

If you suffer from region code troubles, you can download a region free DVD player software tool on your pc and then you can play discs of any regions you want. You can try Leawo Blu-ray Player which is a free Blu-ray player and a region free player.

Personally, neve tried but here you have several hacks:


how to hack dvd player make it any region


Free DVD Unlock Codes Multi Region DVD Money Saving Expert


How do change the DVD region code in Windows 7


DVD Region Codes and Video Encoding Standards and How to Overcome Them

You have probably used up all your region changes. These are limited for copyright reasons.
Download Anydvd from Slysoft.com
This will run your dvds as "region free"
Burn them with Dvdshrink

Have you changed the Regional Code of the DVD changer? Changing of Regional Code of the Changer is permitted for 5 times. To view movies of different region code, some people change it. Suppose you or someone have viewed a movie of different region movie after changing the region code & now you are trying to view a DVD of your region. In this case you will have to change the region code to your region. Changing of region code is available through the setup of the Changer.

-sonsunny

Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__bg78u

i also need a stand for my L1911W-C. any sugestions where i can get one from ?

No problem.

Here is what you need to know:

The regional code for the US is (1).
You can change your DVD Region code up to 5 times on your Mac.

Review the information on DVD Regional codes via this Apple Support link to change the region code:
DVD Region Codes - DVD Player

Let me know if this Apple data helps!

Regards,

-Mactechtrainer

there could be a power switch on the back of tv, check the user manual, also check power cord coonections

DVDs are ecoded with region codes to indicate what area of the world they are made for. These codes may be 1,2,3, etc depending on which region they are made for.
DVD player read these codes and if the disc region code does not match the region the device is made for, the player will not play the disc.
Region 1 is for USA so most DVDp players made for use in USA require region 1 discs.
Some DVD players called multi region DVD players can be set to play different region DVDs but they are typically more expr=ensive then one region players and the code must be changed each time a different region disc is played.

To make region free:
* Open the drawer
Press 0, 1, 2, 3, Play in sequence on the remote control
Play a region 1, 2 ,3 ,4 or any other region to see if the hack has worked!

The disc drawer can obscure the Infra-Red sensor when open, so ensure that you compensate for this when entereing the hack.

You can also return the player to Region 2 only mode using the following sequence:

* Open the drawer
* Press ZOOM
* Press RETURN
* Press POWER