20 Most Recent
Nautica Nst Chrono N19509g Watch for Men - Page 4 Questions & Answers
N15546g
If you haven't got instructions on this, then go to nautica.com and register your watch. Then go to "watch info", sign in and you will be able to access "warranty and manual".You should then be able to download the instructions for your watch.
I have a n 16525 g model and the brasalet is
You can try to get a bracelet from the manufacturer but if the watch is more than 24 months you most likely wont get it. Still, it never hurts to try.
You can get an after market watch band but this may require a modifcation of the lugs on the watch.
Dont work
This is pretty general but here is what you can do...
Check the battery. If the battery is bad then replace it.
If the battery is good have a watch technician check to see that the current is good. If the current is bad then check contacts for corrosion. If still bad have the movement replaced. If there is a signal then a cyclonic can be used to force the movement and free up the gear train. If this still doesnt make the watch work then replace the movement.
This is a very general answer for a general problem.
Are accutime watches waterproof
What a question. ... The back of the watch will give details and it depends upon the model of watch.
Some are, some aren't.
4/26/2024 6:24:24 AM •
Watches
•
Answered
4 hours ago
Sector adv 1000 manual
ZERO-SETTING OF THE SECONDS-HAND & SUB-SECOND HAND ON THE SECTOR ADV1000 CHRONOGRAPH.
NOTE: The pusher buttons A, B & C are positioned on the watch at the 2 o'clock (A), 10 o'clock (B) & 8 o'clock positions (C), while the crown is at the 4 o'clock position.
1) Set the crown at the normal (in) position.
2) Push the B button twice.
3) Pull out the crown to the 2nd position (fully out).
a.) Seconds-hand setting: a push of button A moves the 2nd hand by 1 second. Move it until it is at the zero position.
b.) 2/100ths second hand: a push of button B moves the 2/100ths second hand by one 2/100ths second. A continuous push moves it quickly. Move it until it is at the zero position.
4) Push the crown back in to normal position.
QUICK-SET OF THE CALENDAR DATE
With the alarm switch off, pull out the crown halfway to the first "out" position (not fully out). Turn the crown clockwise to quick-set the date.
4/25/2024 5:30:35 PM •
Watches
•
Answered
17 hours ago
My pearl necklace has broken
Contact a local jeweler and see if they do restringing. Most will charge approx $10 per inch.
Thank you for contacting FixYa.
Jewel
4/7/2024 2:26:15 AM •
Watches
•
Answered
on Apr 07, 2024
Not finding what you are looking for?