20 Most Recent Blaupunkt Used Original RC-12H Remote Control - Page 9 Questions & Answers


Hello, again, Garth -

You may find this article about reporting problems with Showmax informative:
https://mybroadband.co.za/news/broadcasting/144045-showmax-not-working-right-this-is-how-to-report-problems.html

The article gives an email address you can use to report problems you have with Showmax.

Best wishes.

Televison &... | Answered on Sep 11, 2020


[ Work At Home For USA ]
honest online career from home Earns upto $550 to $750 doller by way of work is simple on web. i have made $28K only month via chipping away on internet. Its right way and easy home work maybe a piece adolescent can complete this movement on web and benefits.chek detail .... Www.Works75.com

Televison &... | Answered on Sep 10, 2020


A modern digital tv is as much computer as tv and consequently has much circuitry that is highly vulnerable to voltage surges and transients and while the sort of surge protector you use with your computer would offer some protection from mains borne nasties, if an outside antenna is used an additional pathway for damage is provided that is impossible to protect from short of disconnecting whenever a storm is likely. A lightning strike isn't necessary to cause damage to sensitive circuitry.

You might be lucky, although it is unlikely to be a fuse, it could be or it could be an easy repair, though in my fairly limited experience the tv is unlikely ever to be quite the same ever again...

Televison &... | Answered on Sep 10, 2020


Go to Prime Video Settings --> Parental Controls from your web browser.
Open the Prime Video PIN section under Parental Controls.
Enter the number to set up your PIN. Select Reset your PIN to change your current PIN.

Televison &... | Answered on Sep 10, 2020


Go to the menu and then to the sound setup > speaker and select the internal speakers. You can also do that from the buttons located on the back of the TV.

Televison &... | Answered on Sep 10, 2020


Lines on the screen (vertical/horizontal lines, bands)

Image diagram of symptom


Press the HOME button on the remote to display the TV menu screen.
When the issue occurs in the Menu screenThere may be an issue with your TV. Follow these steps to troubleshoot:
  1. Restart the TV and check if the issue is resolved.
    1. Turn off the TV and unplug the AC power cord (main lead).
    2. Keep the TV unplugged for 2 minutes.
    3. Plug in the AC power cord (main lead) and turn on the TV to check its status.
  2. If the above steps does not help to resolve the symptom, the product may require service. Go to Product Repair.
When the issue occurs on other than the Menu screen There may be issues with the broadcast signal source, Cable/Satellite box, IPTV, or other devices such as a DVD player.
Follow these steps to troubleshoot:

NOTES:
  • If this issue only happen to one particular channel or broadcaster, this may be due to the broadcast signal source. Please contact your service provider for further information.
  • If you experience issues when connecting a TV and an Audio/Video device via an analogue cable (composite or component cable) or HDMI cable, check the following section of this article before proceeding the steps below: Screen issues (Lines/Blurred/Odd colours) from the Audio/Video device
  1. Turn off any electrical or battery-operated devices that may be creating radio frequency (RF) interference.
  2. If using an antenna, broadcast signals are reflected by nearby mountain or surrounding tall buildings and may cause ghosting in the picture.
    It is recommended to adjust the antenna direction and location.
  3. Try plugging the power cord into a different electrical outlet and/or surge protector.
    These symptoms can occur if the electrical outlet is improperly wired or not producing the proper voltage.
    If using a surge protector or extension cord, it also could be faulty.
(Back to top)

How to perform a software update.
  • Clean the TV screen. Refer to the following FAQ.
    How to care the LCD TV
  • If the above steps do not help to resolve the symptom, the product may require service. Go to Product Repair.
  • When the issue occurs on other than the Menu screen There may be issues with the TV settings, broadcast signal source, Cable/Satellite box, IPTV, or other devices such as a DVD player.

    NOTE: If you experience issues when connecting a TV and an Audio/Video device via an analogue cable (composite or component cable) or HDMI cable, check the following section of this article before proceeding the steps below: Screen issues (Lines/Blurred/Odd colours) from the Audio/Video device
    1. For TVs with the Motionflow function, select Standard or Off.
    2. If using an antenna, broadcast signals are reflected by nearby mountain or surrounding tall buildings and may cause ghosting in the picture.
      It is recommended to adjust the antenna direction and location.
    3. The quality obtained from DVD discs recorded on home DVD recorders often varies due to different quality settings being used on the recorders.
      Picture quality from VHS tapes often appears to be significantly worse than other sources, symptoms often include grainy and watery picture.
    4. Reset your TV to the factory defaults. Refer to the instruction manual supplied with the product. Manuals are posted on your model support page.
    (Back to top)

    Picture and video on the TV is displayed doubly.
    (Back to top)

    The screen appears to have a cloudy, white shadow or bright spots when there is no input or when viewing very dark scenes.
    (Back to top)

    Adjusting the Picture setting on my Android TV
  • For other than Android TVs: Adjusting the Picture setting on my LCD TV
  • (Back to top)

    How to reset an Android TV?
    How to perform a power reset on a Sony television.
  • Update the software of your TV to the latest version.
    How to perform a software update.
  • (Back to top)

    Adjusting the Picture setting on my Android TV
  • For other than Android TVs: Adjusting the Picture setting on my LCD TV
  • If your TV has a reset function for its picture settings, follow the instructions below to reset the settings.
  • Press the HOME or MENU button on the remote control.
  • The next steps will depend on your TV menu options:
    • Select Settings- Display & Sound, Picture & Display or Display - Picture or Picture adjustments - Advanced settings - Reset.
    • Select Settings- Display - Picture - Reset.
    • Select Settings - System Settings -Picture - Reset.
      NOTE: If your remote control has the Option button, you can reset the settings by pressing the Option button on the remote control - Picture or Picture Mode - Reset.
  • Restart the TV and check if the issue is resolved.
    1. Turn off the TV and unplug the AC power cord (main lead).
    2. Keep the TV unplugged for 2 minutes.
    3. Plug in the AC power cord (main lead) and turn on the TV to check its status.
  • If the TV is connected to an active and stable Internet connection, install the latest TV software. Refer to the following FAQ.
  • If the above steps do not help to resolve the symptom, the product may require service. Go to Product Repair.
  • When the issue occurs on other than the Menu screen There may be issues with the TV settings, broadcast signal source, Cable/Satellite box, IPTV, or other devices such as a DVD player.

    NOTE: If you experience issues when connecting a TV and an Audio/Video device via an analogue cable (composite or component cable) or HDMI cable, check the following section of this article before proceeding the steps below: Screen issues (Lines/Blurred/Odd colours) from the Audio/Video device
    • If your TV has a reset function for its picture settings, follow the instructions below to reset the settings.
      1. Press the HOME or MENU button on the remote control.
      2. The next steps will depend on your TV menu options:
        • Select Settings- Display & Sound, Picture & Display or Display - Picture or Picture adjustments - Advanced settings - Reset.
        • Select Settings - Display - Picture - Reset.
        • Select Settings- System Settings - Picture - Reset.
          NOTE: If your remote control has the Option button, you can reset the settings by pressing the Option button on the remote control - Picture or Picture Mode - Reset.
    • Check if the cable is firmly connected to the TV and the connected device and make sure it is not loose.
    • Use a spare cable to replace the currently used one and see if the situation will improve.
    • Use another input terminal of the TV.
      1. Connect your device to other input terminals of your TV.
      2. On the TV's supplied remote control, press the input button to switch to the input method that corresponds to the connected device and check if the situation improves.
    • Connect another A/V device to your TV using the same input terminal to check whether the connected A/V device causes the issue.
    • If using an antenna, broadcast signals are reflected by nearby mountain or surrounding tall buildings and may cause ghosting in the picture.
      It is recommended to adjust the antenna direction and location.
    • Turn off any electrical or battery-operated devices that may be creating radio frequency (RF) interference.
    • Reset your TV to the factory defaults:

    Televison &... | Answered on Sep 09, 2020


    I found a perfect fix for the 32 inch Quantum View TVs with a DirecTV remote.

    Press Menu (on your directv remote) , go to settings/help>Settings>RemoteControl>Program Remote>TV.

    When prompted to choose a brand, select CURTIS MATHIS. The codes from Curtis Mathis should match the codes for your Quantum View TV.

    Note: Make sure the remote can 'see' the receiver during this process.

    Televison &... | Answered on Sep 07, 2020


    MPEG-2 video is the file format you’ll need to convert to, but you cannot simply burn the MPEG-2 to a DVD and automatically play it in a DVD player.
    The easily way is to buy software that will make the transition smooth; I recommend VSO Convert to DVD.

    Televison &... | Answered on Sep 07, 2020


    1982 Magnavox (Rebadged Panasonic) VHS Top Loader ...

    ? 9:56
    https://www.youtube.com/watch?v=-VbHbTOolwM
    Jan 14, 2009 - Uploaded by Spats Bear
    This VCR is a beast from November 1982. The tape ... PanasonicNV-333 ... Wait wired remote didn't wireless remotes exist since the 1970's.

    Televison &... | Answered on Sep 07, 2020


    If you have the user manual you will probably find there is a default password or a default PIN number programmed into the box at the factory that you can keep using or change as you see fit.
    My Freeview box uses 1 2 3 4 as the PIN. Lots of old video recorders were the same.

    Televison &... | Answered on Sep 06, 2020


    Hola tengo un control remoto universal marca claro y mi tele es de marca miray. Y no tengo el c?digo de TV miray

    Televison &... | Answered on Sep 05, 2020


    Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
    http://electro-medical.blogspot.com/

    To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

    Televison &... | Answered on Sep 05, 2020


    Maybe Eject can only be performed through the remote controller if there's no Eject button on the TV. A loose, or fallen off, drive belt can cause the dvd player unable to eject. Listen to the drive motor after pressing the eject button. If it runs but no eject, it means the drive belt is loose or fallen off. If no sound at all, the drive motor itself is dead.

    Televison &... | Answered on Sep 05, 2020


    You do not need a remote control. I used my smart phone with IR. Down load tv remote apps and wala its sorted.dont buy universal remote it did not work for me could not find the Sinotec that i have so wasted R400.00

    Televison &... | Answered on Sep 04, 2020

    Not finding what you are looking for?
    Blaupunkt Used Original RC-12H Remote Control Logo

    0 questions posted

    Ask a Question

    Usually answered in minutes!

    Top Blaupunkt Televison & Video Experts

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Vernon Taylor

    Level 3 Expert

    6949 Answers

    Andrew Taylor
    Andrew Taylor

    Level 3 Expert

    34472 Answers

    Are you a Blaupunkt Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    View Most Popular

    Blaupunkt Televison & Video

    • Blaupunkt Televison & Video

    Most Popular Question

    blaupunkt shows yello spots faces off

    • Televison & Video
    Loading...