20 Most Recent Motorola Talkabout MT352TPR Two-Way Radios, 35 miles Range, Weatherproof IP-54, 3 Pack - Page 9 Questions & Answers

This is common. For some reason, the GMRS chargers of all brands break often. Unplug the unit. Try lightly sanding the contacts on the front cup/slot. Make certain you do not push them in too far. If you do, carefully pull them out. They should be bright. Then clean the contacts on the radio. If it still does not work, use a voltmeter and test the power is getting through to the battery from the charging cup. The voltage is DC and should read anywhere from 6-12 volts, maybe more.

I suggest getting both manuals out and check the frequencies you want to work. Match the FREQUENCY numbers (such as 464.500) not channel numbers. Then you must match the Tones, called DPL or QT. This must be completed on each channel you want to work. It is tedious at times and we charge our customers to set them up. Contact the place you purchased the radios from. They may have a cross reference guide. We used to have to make the guides ourselves, but have nothing on Kenwood radios. It just takes time. Good luck!

its done go here and get one Wish bluetooth headset

https://shop.giantintl.com/Manuals.asp They manufacture the radio.

IF BOTH RADIOS WONT CHARGE USING THE SAME CHARGER (SPLIT CORD) THEN ID SAY ITS A GOOD ASSUMPTION THAT ITS THE CHARGER AND NOT THE RADIOS

Hi Bart,here's a link to get a new charger.Is the battery good? Chargers Motorola

Nope...That beep lets you know that you can commence talking. If you start talking before you hear the beep, whoever you're talking to will not hear everything you say.

Giant International. Best of luck. I have never been able to order knobs. Be prepared to make something. I used wooden dowel plugs, drilled into the center and stuck them on with loc tite.

take it in to a service center for a check but the voltage may have done damage internally

Very likely the battery. But first, try these things: make certain the mic hole s not clogged, it is tiny. Clean the battery contacts on the radio AND the battery. Get them shiny! Try again. If static persists, try another battery or buy a new one. There is no easy repair.

I do not know how to make a video. You need the software and proper cable to program a Motorola GP2000. Of course, a computer capable of running the software, which means Windows. Probably not windows 10 yet. I use Windows XP still. Then you need your Ham frequencies, which are easily obtained.

RDU4100 Two way Radio I hope you can locate some information you need Parker. If not, let us know. Have a blessed day. Thank you.

Try to read it and write it again.

Read your Radio and see in option, disable the beep.