20 Most Recent
Nokia 2100 Cellular Phone - Page 4 Questions & Answers
Unlock key guard
Get your phone IMEI number which is a fifteen digits number located in the battery compartment of your phone.
Then Visit http://www.nokiamastercode.com
Input the imei number at the site to generate a master reset code which you input when you switch on your phone.
This enables you to reset your phone security code.
Rate this fixya. Good luck.
12/17/2009 10:25:26 AM •
Nokia 2100...
•
Answered
on Dec 17, 2009
Forgot security code of Nokia 2100
Hi,
If your problem is only to open key pad with out any issue.just remove the battery and again place it and now your mobile is active with out key pad locked now u save all ur numbers and important messages and then restore the settings to facotory settings. now ur default passcode will be 12345.
All the best
SuryaVenu
[email protected]
TELL ME FORMATTING CODE FOR NOKIA 2100
Please do this.Type *#7370# in your mobile phone,it will ask whether
you want to restore factory settings give yes and it will ask for the
code the default code is 12345.Give the code and wait for some time
your phone will restart and you will see that your factory settings are
restored.kindly rate me if i had helped.
Not switch on
this is not software problem its hardware problem. plz go to tecnician and say ur problem her. it power section problem in ur deviece
How to get puk code
Hi tarun,
PUK code in PIN UNLOCKING CODE, ehich is required when you give PIN number wrongly for 3 times,
This code is OPERATOR specific and not phone specific...
TO get the PUK code, call you cell phone operator and ask for the PUK code, they may assist you.... Dont get tensed..
NOTE: if you provide PUK code wrongly for 7 time, you sim may become useless, then you have to buy new SIM
ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR
Nokia 1200
Please contact a eletronics store to see what they can do on this part of the phone:
Nokia 2100 keypad suddenly stopped working
Please try to open the pad and clean its contacts. below is the proceedure to open the phone (if it is not under warranty). you two credit cards and a screw driver.
- Take front faceplate off by inserting card 1 between housing and silver key. As you pull up, take card 2 and slide it on the side of the phone prying the clips off.
- Unscrew these 6 screws at the edges with the T6 screwdriver and release the 4 clips surrounding the LCD screen.
- Slip the little black frame off of the LCD screen, and lift the screen. You should now see a screw. Removing this screw removes the back cover.
- That’s it! Put your new faceplate or housing in and figure out how to put things back by following the directions here in reverse order.
Security code
try pressing 12345 (default security code)
CHARCOIS
Forgot cell phone security code
ya there is one way to unlock your mobile ,but you have to provide me
your mobile IMEI no .which can be obtain by pressing *#-6# at the
screen ,it will show IMEI no of your mobile ,it will 15 digit no...just
send it to me and i will definitely send you the unlock code......
---------------------------------------------------------------------------------------------------
Was this solution helpful? Show your Appreciation by rating it:
Thanks
Dilip Bagdi
Technical Associate
I forgot my security code
if you foregot your code,try to think the hint that you most knwn to your mind,or else go to the nearest cellphone repair shop they easily removed you locked cellphone
Not finding what you are looking for?