VillaWare V00143100 Blender - Answered Questions & Fixed issues

Hi, do you have that parts for Villaware blander?

Not exact same jar will be available, but yes at local blender repair and new blender stores they have vast variety of blender jars.You will definitely get the replacement jar, which will fit your unit.Actually its all the bottom assembly fitting of the jar.The bottom part is the actual part that fits the blender unit.If the jar is cracked, but lower bottom is still good then at blender repair stores they can provide you the compatible jar or make the jar required for you, by removing the bottom fitting of your actual jar and fitting it in the another jar.---------- Yes i agree it will take time to locate the store and explain him the requirement, but its possible. ----------- This will help.Thanks.Helpmech.

You might start with the VillaWare website lined below:
VIllaWare home page

Replacement parts are available here:

http://www.villaware.com/Category.aspx?&filter=parts&pid=7843

I have the same problem. Anyone have an answer?

MANUFACTURER WEB SITE IN MALAYSIA I HAVE ASKED THEM IF I CAN BUY SOME I WILL LET YOU KNOW IF THE PRICE IS NOT TO EXPENSIVE

http://www.alibaba.com/product-free/100075597/Villaware_Moderno_Pro_Infinity.html

MANUFACTURER WEB SITE IN MALAYSIA I HAVE ASKED THEM IF I CAN BUY SOME I WILL LET YOU KNOW IF THE PRICE IS NOT TO EXPENSIVE

http://www.alibaba.com/product-free/100075597/Villaware_Moderno_Pro_Infinity.html

Please contact manufacturer: https://www.villaware.com/customerservicecontact?cid=contactus https://www.villaware.com/customerservicecontact?cid=contactus

http://www.rawnutrition.ca/img/product/description/Victorio%20Apple%20Peeler%20User%20Manual.pdf Its look alike it should do the same

Check on Ebay, see if anybody is selling one

try to post on craigs list that might help you.

Direct or from eBay https://www.google.com/search?q=Kitchen+Aid+Model+KHB300+hand+held+blender+parts ..

Jimmy LavinderYou are tagging a dormant unanswered post that is 10 years old!The section up at the top is for you to ASK the Original Poster a QUESTION before giving him an ANSWER. You can't get any parts for anything online without an email address and a physical address. These parts are never found in a store. Durabrand is a cheap company of the 'sell and run' variety. There are no spares.https://www.google.com/search?q=durabrand+TSK-9368AP+partsDump it and buy a Vitamix, a company that guarantees spares forever or even a Braun, or Oster that guarantees them for 10 years...

Olabisi. It is better to create your own question rather than tagging a 13 year old question in the area where you ask the OP for further information before committing to an answer. Stir function runs the blades at a much slower speed to incorporate ingredients slowly. https://www.kitchenaid.com/pinch-of-help... STIR. To stir ingredients in a blender, start with a low, slow speed and gradually increase it to a medium speed. Blend until ingredients are completely combined. Different Blender Settings and What They Do - KitchenAid ..

Actually I do repair these stick types all of the time. The trick is getting the head off. Then its a simple Process to remove the shaft and clean inside and add bearings or bushings of needed. After removing the blade and blade holder, Remove the coupling at the top, then remove the 4 screws. After that you will see a aluminum washer. Stop here. To remove the head assembly, you need to make a large slide hammer like a split bearing. Lead or steel is good. Or a circle of cement 8 inches in Diameter and 4 inches thick. The inside hole should be as close to the diameter of the mixer shaft as possible. Cast it in two halves so when assembled it forms a ring around the shaft. Wrap this with lots of duct tape. also place a ring of duct tape around the plastic head where the cement will touch it. now wearing gloves, grab the metal base (or secure it to something with a chain or in the fork of a tree). Once secured, slide the weight quickly against the plastic head assembly. After a few hits the head should pop out. Then remove the shaft, replace the o-rungs in the center bearing, clean the unit & reassemble.Use Silicone as sealant when reassembling the body. There is no need to remove the lower seal assembly but clean it with a small bottle brush. I have included pictures of this procedure but im too ugly to make a You Tube Video. ;) These pictures are from my teaching tool and were cut to show anatomy. Theseafox Enterprises

Question edited for clarity. Question moved from Washing Machines category to Blenders. Something to do with the Outlet and Soy Milk! :>D https://www.amazon.com/gp/customer-reviews/R3S2NMMMKVYCV8?ASIN=B09L7PXN1B https://www.google.com/search?q=joyoung+a+super+power+blender+e08+error ..

Question edited for clarity. That is likely a failed heating element, failed thermostat, or worse case scenario, a failed control board. https://www.google.com/search?q=prolectrix+soup+maker+not+heating+up ..

the lock/unlock button on the Cuisinart Smart Stick CSB-75 blender may not stay locked when pressed in. The solution is to hold the blender in the palm of your dominant hand, press the low or high button and hold, then push and release the lock button on top with a finger on your other hand. The blender motor should start as soon as you push the lock button down and stay running until you release the high or low button. However, fix.com offers OEM Black and Decker blender parts and accessories, including rubber gaskets, jar bases, measuring cup lid inserts, and blade assemblies. You may want to check if the parts you need are available and replaceable. If you are unable to repair the blender yourself, you can contact Black and Decker customer service for assistance. They may be able to provide you with additional information on how to repair your blender or direct you to a local repair shop.

Send it back under the lifetime warranty on the motor. The motor is not working, right? https://www.google.com/search?q=bamix+blender+warranty ..

Question edited for clarity. It appears to be an eBay special. you may be able to buy using the diameter. Shops that sell fasteners sell O-rings, but this is likely wider, so more a gasket. https://www.google.com/search?q=GNC+Live+Well+Blender+BL3340+replacement+O-ring https://www.google.com/search?q=GNC+Live+Well+Blender+BL3340+replacement+gasket ..