Black & Decker FP1445 Food Processor - Page 5 - Answered Questions & Fixed issues
I've put the feed tube into my kitchen aid food processor in the wrong way. It's gone straight through and won't come back out. Help please
It sounds like you may have accidentally inserted the feed tube into your kitchen aid food processor upside down. If the feed tube is stuck and won't come out, there are a few steps you can try to remove it:
First, try gently pulling on the feed tube to see if it comes out. Be careful not to apply too much force, as this could damage the food processor or the feed tube. If the feed tube is still stuck, try turning the food processor upside down and gently shaking it to see if the feed tube falls out. If the feed tube is still stuck, you may need to use a tool to help remove it. A pair of pliers or a pair of needle-nose pliers can be helpful in this situation. Carefully grip the feed tube with the pliers and gently pull it out. If none of these methods work, it may be necessary to disassemble the food processor to remove the feed tube. This should only be done as a last resort, as it can be challenging to reassemble the food processor correctly. If you are not comfortable with this, it may be best to seek the assistance of a professional.
12/26/2022 5:00:50 PM •
Food Processors
•
Answered
on Dec 26, 2022
•
88 views
I used my Magimix Food Processor, and after use I cannot remove the blade and the bowl, they're locked. Help please?
Question edited for clarity.
On the bottom of the bowl there is a plastic rod that goes into a hole as part of the safety interlock which stops you switching on with the lid removed. Sometimes they stick or the return spring breaks. Remove the lid and see if you can lift the rod a little. Sometimes just jiggling the bowl back and forth with free it up. You can also put a towel on your counter top and turn the Magimix upside down and tap the bowl on the counter. Jiggle the bowl and see if it turns?
..
3/20/2022 5:52:45 PM •
Food Processors
•
Answered
on Mar 20, 2022
•
331 views
Usha processor showing overloaded even for empty vessel....... please help
Question moved from Computers to Food Processors.
When you fail to clean the machine properly food liquids run down the side of the drive spindle and gum up the works to the point that the machine is under strain as soon as you press the button. This machine is only available in India. The company is based in New Delhi. Contact them and ask them to repair it under warranty. Tell them the biggest maintenance website in the world, said it is their task to fix for free. If they say 'no', take it apart, clean and grease all the moving parts paying special attention to the spindle and motor. It is a known fault.
This appliance is warranted for 2 years on product & 5 Years on Motor against all manufacturing defects from the date of sale. In the event of any complaint, please contact Usha Care at Toll Free No. 1 800 103 3111.
https://images-eu.ssl-images-amazon.com/images/I/81T64YJRTES.pdf
https://www.google.com/search?q=usha+food+processor+overload+problem
..
12/14/2021 4:22:53 PM •
Food Processors
•
Answered
on Dec 14, 2021
•
454 views
Machine with blade on starts when locking lid is off ??
Hi Gill
Let's guess that your MYSTERY item is a Food Processor and not a Computer. I moved the question from 'Computers and Internet' category.
There is a safety interlock switch in the base that is pressed by a rod through the handle using a ramp section in the locking lid.
If my guess is right, it is very dangerous, and you should not use it until it is repaired. It may be that you store it with the lid locked down? This is not a good idea especially if the little hole has moisture of food debris in it as it dries out. You can look at it and see if you can free the button up.
11/15/2021 10:15:22 PM •
Food Processors
•
Answered
on Nov 15, 2021
•
51 views
Not finding what you are looking for?