20 Most Recent Audiovox D1718 - Page 9 Questions & Answers

Hi,

I have the same problem!

I can not figure the position of the spring.

Did you find an answer?

Simple if you don't know where to ground the wire to, just ground it with the ground wire of the radio. Twist the pink and black wires together, then put them with the black ground comming from the car. Hope this helps.

power supply

Try put again the batteries.A very simply and efficiently mode to see the remote control is work or not to tested of pressed taste next on radio posted on FM or MW.

you need to search your universal remote code for a audiovox code try all of the audiovox codes then once you find the right one, how you will tell is when you turn the tv off and on click menu then unlock the tv

Hi, you can order a new power supply adapter from the following website link. http://www.lcdpayless.com/productpage.php?productId=5316

Let me know if you need anything else.



Benjamin

Open the casing, check the following and follow the instructions.
1. Clean the lens using cotton or cotton cloth.
2 Take extra care not to touch the lens with bare hands.
3. If the player displays "no disc" right after closing the tray then
check capstan motor if it spins smoothly.
4. Replace capstan motor if it cannot spin smoothly or if it seems it
cannot spin the disc.

The most likely the TV has a power supply related problem. The most common thing to go out is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If by chance the TV is still under warranty with some type of extended purchase plan, go that route.
If not under warranty and If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.

hi this is praky16 u didnt rate for my chat. pls do it

ATSC is the name given to the new digital signal. NTSC is the current analogue signal. This is the standard name given to the American system of broadcasting.

sounds like relay chater might be a bad capastor out of spec near the relay i dont have the spec on this tv but some sanyo tv had that kind of sound and it is a bad capastor like 470u at 25 volts in them. Look for a bulg on the top of caps around relay area. Board marking are like c 601 this is not the right number for your set just to let you know sort of what you are looking for the c standing for capastor. Be sure to unplug tv before youtake it apart there is high voltage in the set even after you unplug it.the cap shuld be black or blue with a silver flat top even if they look good still can be bad cant tell untell you test them on a machine.

if you have the red and white audio jacks your stereo you should be able to connect from the dvd to your stereo and select the proper input on the stereo, that should put the sound through the car steakers.

good luck

This remote is available from Audiovox. In the continental USA and Canada call 1 800 645-4994 to speak with a customer service representative.