20 Most Recent McCulloch Mcs1400 14a Electric Leaf & Branch Chipper Shredder Mulcher Garden - Page 8 Questions & Answers

Oil for wet brakes most of the tracktors are using that oil to day

Likely the planetary reduction gear for that wheel

This machine has one combined gearbox and hydraulics the same oil is used for the gearbox and the hydrolic with dipstick on the rear of the tractor

Could be leaking clutch pack for the forward travel You will have to plug in a pressure meter be careful not to use it with too low pressure as you will burn the clutch

Sounds like a blockage at the control valve.

Will it start on starting fluid?

Filters?

www.specsserver.com/CACHE/FRKMDQXCFAQG.PDF

16.1 gal/min

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything someone on fixya recommended it to me and I thank him even today They have full manuals and it's verrrrry cheap and mine I got free in offers 3rd time I also had an issue with the file so the girl replaced it in 30 mins Try it out brother

It can be both hydraulic and electric problem I recommend a specialist it needs a skilled person it is not DIY matter

Try google with make and model

Here is something to try. Could be the fuel tank vent is blocked, so loosen the tan cap to ensure air can get in. Then start and see if it can move at higher rpm. If the engine still stalls out, check the fuel filter and replace as it may also be blocked and not letting enough fuel to pass when needed at higher rpm.

Does the safety lock out handle work ? May have.a faulty switch broken wire or solenoid stopping the hydraulics from working

I found something related.. Please check if it helps and match with your product series: https://big-manuals.com/products/bobcat-773-773-high-flow-turbo-773-skid-steer-loader-g-series-service-repair-manual

You've got some sort of safety lockout. There will be a switch or sensor somewhere that's not working properly. Make sure you stop the machine and chock it before you work on it or it will come down and crush your head.

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years must try this bitman and reliable-store. Both are good

Did you check the return fuel line? there is a spring loaded ball valve beside the fuel injection pump. just replace it. it is because the said valve is for holding the pressure of fuel in pump gallery ,if it is not working properly the pressure goes down and engine became stop or no power. Please try.

Here is an operators manual. It might be of some help https://www.thomasloaders.com/upload_files/manuals/175%20Owner(1).pdf