20 Most Recent McCulloch Mcs1400 14a Electric Leaf & Branch Chipper Shredder Mulcher Garden Questions & Answers


There's a website that has
all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

McCulloch... | Answered on Jan 21, 2019


I take help from online websites that have this service like helping in repair some have instant help.. others are a bit slow which I don't prefer..
. rest is up to us.. U can also get free manuals

McCulloch... | Answered on Jan 18, 2019


hello
u will find a lot of wiring diagrams and circuit diagrams and stuff like this at few sites I know
the girl in the chat box can help u instantly

McCulloch... | Answered on Jan 18, 2019


There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

McCulloch Heavy... | Answered on Jan 22, 2019


There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

McCulloch Heavy... | Answered on Jan 22, 2019


I have a flymo 430 petrol strimmer and cannot start it. ive cleaned the filter, put in new plug it went first time and then stopped and wont start again the plug seems to get wet all the time any ideas

McCulloch Heavy... | Answered on Sep 12, 2011


Since you have already removed the rivets, just go to the numbered portion of the instructions below and follow them to replace the rope.
To put the recoil assembly back on the blower housing, you will need to obtain a pop rivet tool and rivets or or 4 very short machine screws with lock washers and nuts and insert them from inside the blower housing so the flywheel doesn't hit the ends, and tighten them securely

Here is the instructions DIRECT FROM BRIGGS & STRATTON:

This is a relatively simple process, but you have to be VERY careful when doing this. The spring is long, under some tension and has sharp edges. Anytime you are dealing with the manual rewind starter assembly, there is risk of the spring coming out and possibly injuring yourself or others. If you do not feel comfortable performing this repair, I strongly suggest visiting one of our many authorized dealers in your area and have them do this for you.
You will have to remove the gas tank to get at the rewind and blower housing. Remove the entire blower housing and rewind assembly and turn it upside down.
NOTE:You do not have to drill out the rivets to get to the back of the rewind assembly. This is only necessary if you are removing the ENTIRE rewind assembly, (metal housing and all) and are separating it from the blower housing.
You'll need a pair of vise grips or a screw driver, some rewind rope, a long thin sharp tip flexible object (the wire from a coat hanger may work) and a lighter handy.

  1. Take the pulley and start to turn it so that the rope becomes loose.
  2. Remove the rope.
  3. Once the pulley is all the way out, with the most tension, either use the screwdriver between the spokes of the pulley, or use the vise grips to hold the pulley in place; be careful not to place too much pressure on the vise grips, the plastic pulley may break!
  4. Make sure that the hole in the pulley lines up with the hole on the rewind assembly.
  5. Using the wire from the coat hanger, push the rope through the hole of the rewind and pulley. Pull the rope through the pulley and tie it off. Now use the lighter to burn the end of the rope to prevent the not from coming off.
  6. Now, remove the screwdriver or vise grips, while holding on to the pulley.
  7. SLOWLY let go of the pulley and the rope should feed back into the pulley as you do this.

Heavy Machinery | Answered on Apr 12, 2020


there is a solenoide problem.
in the right side of the front engine under the alternater has an oil pump and on top of that is a solenoid. after some time the build dirt and grease on the connector.\
that should be it.\

Heavy Machinery | Answered on Mar 18, 2020


https://www.youtube.com/watch?v=7DTxB9v6Nv8

Heavy Machinery | Answered on Feb 17, 2020


For all kind of manuals. You can also visit this website.They offer 100% satisfaction guarantee.
https://big-manuals.com/

Heavy Machinery | Answered on Jan 11, 2020


Contact John Deere to request

Heavy Machinery | Answered on Dec 27, 2019


Contact John Deere directly to request the diagram.

Heavy Machinery | Answered on Dec 24, 2019


check the pressure for each of the clutch packs through the test ports with a pressure gauge, sounds like you are losing pressure when the oil is hot and thin. Have the engine at running temp when testing,
also test the charge pump pressure for system pressure.

Heavy Machinery | Answered on Dec 17, 2019


Model 256c means it's a Caterpillar. Did you look under the seat? Since you apparently don't have an owner's manual, you need to get one. Manual should be stored on the machine in a weatherproof case.

Heavy Machinery | Answered on Dec 17, 2019


Hi, Greetings
We have all bobcat S650 Manuals. If you need so please contact us:- [email protected] or Visit Store :-
https://heavy-equipmentmanual.com/

Heavy Machinery | Answered on Dec 17, 2019

Not finding what you are looking for?
McCulloch Mcs1400 14a Electric Leaf & Branch Chipper Shredder Mulcher Garden Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top McCulloch Heavy Machinery Experts

Bill Boyd

Level 3 Expert

53800 Answers

steve

Level 3 Expert

35295 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a McCulloch Heavy Machinery Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

McCulloch Heavy Machinery

  • McCulloch Heavy Machinery

Most Popular Question

lubrication garden shredder

  • Heavy Machinery
Loading...