A broken fuse replaced ? maesured ? heating element measure are there burning control lights ? , or no function at all program clock defect ? , its in safe mode because of overheat protection ? , make
regular maintenance schedule to clean your cooling fan between its grooves ??? thats the caused of many Unforeseen house fires.
especial condens dryers because of the highly combustible dust buildup,, do a measure of the thermal security units on the heating element and its on begin or the end placed of the heating element. the program clock the motor carbon brushes of this part maybe is an autostop protection activated inside the brush itself and if it has an induction motor the start capacitor can be damaged.
? 6:23
https://www.youtube.com/watch?v=dFB4vnmADh0
Jun 20, 2011 - Uploaded by Repairs101
How to do-it-yourself instructional on changing the drive belt on an electric ... She wanted to know about replacing the drive beltin her clothes dryer. ..... How to replace tumble dryer beltHotpoint, Indesit, Ariston, Creda, Proline ...
? 9:36
https://www.youtube.com/watch?v=kNJGHyEPiJA
Jan 30, 2014 - Uploaded by how-2-repair.com
How to replace tumble dryer belt Hotpoint, Indesit, Ariston, Creda, .... to get right and the grooves correspond to the drive, so really obvious..
? 5:14
https://www.youtube.com/watch?v=ZXSJlWcZPiY
Oct 25, 2013 - Uploaded by AppliancePartsPros
Buy the new Dryer Drive Belt WE12M29 ... to replace the Dryer Drive Belt WE12M29 on GE, Hotpoint, RCA, Sears, and Kenmore dryers.
What you can do without any tools or experience...
Ok... Let's first assume you have made sure there is nothing keeping the door from closing completely. The start circuit overrides the door switch momentarily to initiate the run circuit.
A malfunctioning door switch is possible but they are simple and built for many cycles. The timer could not be in a "RUN" position. Reposition it to "TIMED " cycle of a reasonable length for the load.
Check the closing of the door and the contact with the door-switch is not obstructed in any way.
Retry the start button....
If it still will not run on it's own, it will require internal testing. I would have to recommend a qualified repair Tech be called.
Sure, but why? The timer is hooked up to a cam(s) that sets up the different operations of unit. Without the cam working about all you will do is maybe get a spinning motor at best.
Replace the messed up timer assembly.
Since no dryer I am aware of uses any liquid, I suggest you may be putting wet clothes into the dryer.
This can happen if the washer does not spin the clothes nearly dry. Many dryers have small holes in the dryer drum to let excess water flow out, I would guess that may be the case with yours.
Are your clothes nearly dry when they come out of the washer?
If not, perhaps the washer has a loose belt or has a problem with the "dry" cycle.
God bless your efforts.
You have not share the year of this dryer, but the newer ones ( since 1985) began to add heat sensors and fuses. These "fuses" and "thermostats" can fail, and need replacement.
They are tested with a volt-ohm meter or a multi-meter.
Likely you have one that has failed.
The newest models have as many as 6. An average is about 4.
God bless your efforts.