20 Most Recent Hotpoint NVL333EY Electric Dryer Questions & Answers


I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

Hotpoint... | Answered on Nov 21, 2017

Strange. Heaters usually shut down with the spinning drum when door is open. If you check the schematic for unit you can check to see if in fact this is correct operation. Attached site usually has schematics for appliances. You might want to check. Search Over 2 1 Million Appliance Parts

Hotpoint... | Answered on Sep 01, 2017

My Hotpoint dryer is seven years old and did the exact same thing. When I got over the anger and the thought of spending 4 or 5 hundred dollars to replace it I started messing with it. I finally decided that since it buzzed when I tried to start it there was current there. The only other thing it could be was the drying cycle knob.
I held the start knob and let it buzz while I slowly turned the dryer cycle knob to the right. As I turned through each cycle it would hit "off" and the buzzing would stop and then resume as I moved past the "off " setting. On the third trip around the dryer "started" and has been working since. Maybe something got out of kilter. Apparently the problem was in the knob that controls the drying cycles.

Hotpoint... | Answered on Mar 06, 2015

Not exactly the Model you were looking for but should be close enough to help:

Hotpoint... | Answered on May 30, 2014

there is a problem with your exhaust check the air duct or take off the exhaust hose it will be packed with lint this will keep the dryer from running correctly !!!

Hotpoint... | Answered on Nov 14, 2013

WE12X10009 belt part number and it's around 45 dollars

Hotpoint... | Answered on May 11, 2013

How hard is it for the drum to turn? Have you checked the glides as seen in this video?
Paw Paws dryer repair page for GE

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hotpoint... | Answered on Jan 08, 2013

in electric dryers,no heat is often caused by burnt-out heating elements,then overheat thermostats,and lastly operating thermostats.this assumes power and drum operation are nominal. some elements are in a "containment vessel". the really tough ones are behind the drum WITHOUT a separate enclosure. as it. is with dryers,the drum belt is best untightened by undogging it from the idler pulley.

Hotpoint... | Answered on Oct 16, 2012

Got a modelnumber so I can see your unit as you do?
Waiting to hear from you,Eric and Ann Campion
P.S. Please keep in mind we help pay our staff with earnings from parts sales. Help us keep this valuable service free and order your parts from us. Visit our website for additional help at http://www.affordableappliance.com or for Parts Order Only, Call 1-570-622-6441

Hotpoint... | Answered on Apr 30, 2012

I worked on one of these not long ago that was tearing up clothes.. Took some pix

I would say take a look at your element for breaks.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hotpoint... | Answered on Sep 20, 2011

Not finding what you are looking for?
Hotpoint NVL333EY Electric Dryer Logo

127 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Dryers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers


Level 3 Expert

85239 Answers

Are you a Hotpoint Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hotpoint Dryers

  • Hotpoint Dryers

Most Popular Question

dryer makes buzzing noise when push

  • Dryers