20 Most Recent Vitamix Vita Mix 891 - 1-Drive Socket Kit w/ Allen Wrench & Instructions For A - Page 3 Questions & Answers

0answers
0helpful
1answer

Vitamix smoke and smell

My bmw e46 320d have a thick white smoke smell like diesel when I start it. when reffing there is much more smoke. Model 2001/2002. What can the problem be
1/9/2014 5:07:53 PM • Vitamix Blenders • Answered on Jan 09, 2014
0helpful
1answer

Reset button blender

If they do have a reset button it is normally underneath.
12/31/2013 4:44:19 AM • Vitamix Blenders • Answered on Dec 31, 2013
0helpful
1answer

How can I cahnge Voltage from 110 to 230 ?

Either a transformer from 230v down to your 110v which will be roughly as big as your blender or a new motor and new pcb assy.
12/31/2013 4:42:34 AM • Vitamix Blenders • Answered on Dec 31, 2013
0helpful
1answer

How do i change the gear on the top of the Vitamix 5200

Remove beaker, remove big black rubber part from top of motor housing. At the back just below the gear you will see a small dob of white silicone, dig it out. That will reveal a gap to allow you to put an allen key in there. Inspect the top flange of the "gear" carefully, there is a nearly invisible arrow or marking in one place. Line that up with the gap at the back, that is where the allen screw is.Undo it and lift the gear off. Read the instructions that come with the new gear.
12/5/2013 7:51:15 AM • Vitamix Blenders • Answered on Dec 05, 2013
0helpful
1answer

When turning my Vitamix product on high it runs

It sounds like the motor is overheating, how long will it run with no beaker on it? If still 45 seconds I'd say new motor time. If it runs for 5 or 10 minutes then I would say replace the blade and bearing assembly in the beaker.
12/5/2013 7:41:56 AM • Vitamix Blenders • Answered on Dec 05, 2013
0helpful
1answer

Repack bearings

On the Vitamix blender models we have here in NZ it is not possible to repack the bearings, you just purchase a new blade assembly complete with bearings and the driving clutch.
12/5/2013 7:30:54 AM • Vitamix Blenders • Answered on Dec 05, 2013
0helpful
1answer

How can I change from 110 Volt to 230 volts

use a converter plug or a step down traansformer
11/3/2013 7:11:04 PM • Vitamix Blenders • Answered on Nov 03, 2013
0answers
0answers
0answers
Not finding what you are looking for?
Vitamix Vita Mix 891 - 1-Drive Socket Kit w/ Allen Wrench & Instructions For A Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Vitamix Blenders Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Vitamix Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Vitamix Blenders

  • Vitamix Blenders

Most Popular Question

buy clutch vita mix 5000

  • Blenders
Loading...