20 Most Recent
IBM ThinkPad R40 2722 Notebook - Page 7 Questions & Answers
Cd drive causes system hang when inserted in
Is your virus scanning program set to scan the cd rom drive on access?
It may be scanning the cd before it will allow you to use it.
and
some times caused by missing drivers so intall them properly again
I got problem with installation IBM R40
Go to the IBM/Lenovo WEB site - support/download page and download the latest Windows XP or Vista device drivers for your model computer, Use this link :- http://www.ibm.com/products/finder/us/finders?pg=ddfinder&cm_re=other-_-suprcn-_-download
You can download the various drivers and then you click on and run the variour drivers, they will then unzip and expand into a folder on C:\drivers Then install the various drivers from this folder.
Cracked monitor
Hi there.
I'm in no doubt that the screen has to be replaced and maybe other components to if they have suffered shock damage.
If you want to check to see if the system still works plug an external monitor to the laptop, then use the keyboard toggle to switch screens (usually hold down Fn and hit the F key with a monitor icon on it)
If you get a good display whilst using the external and the OS works properly then it will just be the screen and any plastics that need replacing.
Good luck and thanks for choosing FixYa!!
Need drivers for IBM r40 thinkpad laptop
Hi there.
Go here to IBM Levono support, choose your operating system and download the drivers you need >>>>>>
http://www-307.ibm.com/pc/support/site.wss/product.do?brandind=10&familyind=113090&machineind=117278&operatingsystemind=49979&template=%2Fproductselection%2Flandingpages%2FbrowseByProductLandingPage.vm&validate=true
Good luck and thanks for choosing FixYa!!
Computer does`t recognize psp
try to use another usb connector cable with your psp. It has some lost connection...maybe the data connector is loose. USB has 4 pin(pc side) the voltage supply for power and the data pin..just try.. if it doesnt work...checked if your in admin account because some hardware cant be installed if your not the admin of the pc.
PC won't wake up after Hibernate, Standby or Restart
You need to take off your hibernation.
In control panel display then screensaver.Then click power at the bottom of that screen.
You'll see a setting for system standby you can set that to never.At the top click on hibernate remove the check in enable hibernation.
Click apply restart and your system should work.
My IBM thinkpad R40 type
Could be overheating problem. Your processor fan is dirty or faulty. Or its vent and airway is clog.
More Laptop issues
Most likely video memory.
Try to hook up an external monitor and switch from your LCD screen to the external (Fn key and F7 or whatever key indicates by a little picture that you can go to another monitor.)
Does that work? If so, your video on the motherboard or video card is bad.
I purchased Compaq Presario CQ40 Notebook / laptop
Your computer may simply be unable to run 2 operating systems. On the odd occasion the main OS usually the newest one in this case vista is running in the background and interfering with kernel operations even if you have selected "Previous version of windows" the 1 and only solution i know of is to not only re-format XP but Vista also.
http://www.drivermax.com/
the website above MIGHT be able to find driver needed but i dont think it is a driver problem.
This may be the only way- do this first
IBM ThinkPad R40 No PowerUp
If the the ram is the problem of your system, there should be a power on light on the system. indicating that some of the component of the system is not working correctly. But since you mentioned there is no light, it is the possibility that the problem is the motherboard itself.
My display gets distorted
There is a simple test to narrow the possibilities. Connect your Thinkpad to a known working monitor using the video out connections at the back base of the computer. Then power on your R40 and see if the distorted screen develops on the known working monitor. If it does then you very likely have the BGA video problem, or Ball Grid Assembly problem and the problem is caused by a video/graphics chip on the motherboard. If you known working screen paired with your R40's base works fine, then you know it is a problem related to the screen itself and will call for either a new inverter or new backlight or new screen depending on further tests. But my bet is that it is the BGA problem which you can learn more about by searching for those terms on the net. There are services that repair ("reball") these BGAs but you have to remove the motherboard from the computer, or pay the service to do so. You can download the HMM, Harware Maintenance Manual, from IBM/Lenovo's site to get an idea of what is involved in opening up your R40 to extract the motherboard. This should help you narrow things down.
My pcs quality & display has turned bad after
1. What did the repair shop say about the problem?
2. Have you checked the system settings/system appearance and manager settings, as well as your power saver settings?
3. A reinstallation of your base operating system, after loading your important files elsewhere should reset things to initial conditions.
Not finding what you are looking for?