20 Most Recent Panasonic Palmcam PV-SD5000 Digital Camera - Page 9 Questions & Answers

There is no way to change one camera type to another, even by shouting the question. You will have to sell it, or part-exchange it, and purchase a digital model.

You can download a manual for almost any equipment by Googling the make and model followed by the word Manual, then follow the appropriate link(s).

You must ensure that batteries are properly arranged or not.

Try Ebay, quoting the model number of the battery, but beware, some cameras will only accept the manufacturer's own batteries, not cheaper 'compatible' ones.

Do a factory reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Hi, it looks like you have damaged the zoom mechanism that's why it will not zoom out . The unit will have to be repaired best to get a quote for repair first.

This function should be available via the menu system - further information will be in the manual. There is a freeware program called SDFormatter which formats SD cards to be usable in some cameras - try Googling this, downloading it and trying it. As ever with downloaded software, ensure your antivirus definitions are up to date.

When you say 'rest', do you mean 'pause' ? It should be clearly marked on both the front panel and on the remote control. If not, a brief perusal of the manual should give you the information you require.

The best course of action here is to just replace the camera, the repair cost is likely close to the cost of a newer model.

This could be a battery issue - have you tried replacing or recharging the batteries ?

Have you thought of looking on the Panasonic website ?

the easiest method is to simply remove the battery and leave it out for a DAY and re install it and it should go into initial set up mode where you can select the language. This also applies to a lot of other electronics. If the battery is permanent simply run it down and keep trying to use it make sure all power is drained from system fully charge it and it should go to initial set up when you power it up.

Your model appears to be HC-WX970???? There does NOT seem to be a firmware update Verify with correct model number at Downloads

http://www.manualscamera.com/manuals/panasonic/Panasonic_Lumix_DMC-FX66.pdf

Do you mean the Panasonic Viera TC-P50ST30? The manual is available from the manufacturer on the product page: http://shop.panasonic.com/support-only/TC-P50ST30.html . Scroll down past the Firmware, Tutorials and Specifications sections. The direct link to the English version of the manual is http://service.us.panasonic.com/OPERMANPDF/TCP42ST30.PDF . (You will need Adobe Reader or a similar program available to read the manual.) The English version is the second link in the Owner's Manuals and Documentation section. I hope this helps. Cindy Wells