20 Most Recent
Audiovox AMP522A Car Audio Amplifier Questions & Answers
RCA input
Not possible to hook up a stereo signal to a mono and get a stereo signal back out.
Wiring diagram
Most amps wiring is universal. If u need a high imput plug you might be out of luck they usually come in the box that the amp came in. The input colors should be White and white / blk for left side speakers and gray and gray / blk for right side. I also recommend dumping that amp right in the trash can , sorry to say it like that but that amp is a piece of junk you probably wont get much life out of it, they dont put out anything. Anyway, good luck if u end up using it.
Car amp high input pinout
With a 4-pin connector - from left, facing the side of amp with RCAs and high level input:
Left speaker + input, Left speaker - input, right speaker - input, right speaker + input
With 5-pin connector - same as above, except center pin goes to ground and 2 right side pins are for right speaker.
What are the input wires on a audiovox amp777
The Audiovox AMP777 is a 4-channel power amplifier, and the input wires will depend on the audio source you are using. Typically, the amplifier will have RCA input jacks for left and right channels, and you would use RCA cables to connect the audio source to the amplifier. Some amplifiers also have a high-level input option, which would allow you to connect speaker wires directly to the amplifier's input terminals. However, it's always best to consult the user manual or contact Audiovox support for specific wiring instructions for your amplifier model.
My cd runs but will not play the cd
Quite common problem. Repair it or replace your player if repair cost is too high. Personally, I stopped using CD players time ago: I use a mp3 player.
Not finding what you are looking for?