Top 20 Bush 42" LCD TV 1920x1080, 50 Hz, Freeview HD, HDTV, LED Backlight, 3D Questions & Answers

There are many reasons for this fault. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Search the site by type in the "brand name" to your device; (Exclude the model number), or "Double image" in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences to the author of that site.

Check whether the audio is muted by accidental press at remote control button. Enter its sound menu, and check it. If muted, as you know there will be no audio output. If not muted, check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

if it is not connected to a soung system that might be at fault reset it to factory default through the settings menus available on the remote and see if that makes a difference. If it only works via a remote control ensure the remote is functioning . If you reset successfully and thereis still no sound, (and the cause is not a sound system or such,) vthen you probably need the services of a technician. No doubt , even in todays modern tvs, the sound output can go independently of the video output.

Image engine is failing.

It's possible it may be an error code. Depending on the number of blinks it will tell you what to look for when diagnosing the TV.

Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Sounds like a dry joint. I'd hazard a guess that it's in the PSU.

Free bush tv software update downloads Try this link to download the firmware. You can get it from the authorized service centre for Bush too. http://electronicshelponline.blogspot.com/

Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

I think that the tv is trying to return to its last state and can't log itself into Netflix or something along those lines and it's confusing its brain. I pressed the power off button while I had Netflix on and it's just switching itself on and off now. Mines 4 months old so it can't be wear and tear.

Here is the Manual for it.https://www.manualslib.com/manual/3150928/Bush-Cd608.html#manualCaring For Compact Discs; Fm Radio Mode; Wire ...ManualsLibhttps://www.manualslib.com > manual > Bush-Cd608Bush CD608 Manual Online: caring for compact discs, Fm Radio Mode, Wire Radio Aerial. • Do Not Touch The Playback Side Of The Cd. • Do Not Attach Paper Or .....

Question edited for clarity. Question moved from Smart Computers to Bush Television. No, if is worked before, you don't need a booster. It is a software glitch or a WiFi setting that is incorrect. Factory Reset the television. Re-enter the WiFi settings, (SSID and Password), and then do any Software Updates. Google bush (model) factory reset All questions need 'make model (what is is)' as first 3 words please. ..

There is a trick. Aim the front of the remote at the front facing selfie camera lens or a smartphone and press a button on the remote. You should see a flash on the screen? Disconnect the television from the mains. Replace the remote batteries with fresh ones. Plug the television in and try again.

Question edited for clarity, 'make model (what it is)'. Question moved from Bush Computers to Bush Television. Very vague question, what type of code, universal remote code, parental lock PIN Code, secret engineer admin code, diagnostic trouble codes? Let's start with Remote Codes. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote All the remote codes if you want to go the 1980s route. https://www.google.ca/search?q=universal+remote+codes ..

Bush are NOT a good make, they used to be but not any more. It sounds like a dry joint on a component. Not easy to find, you need a powerful magnifier and check the solder joints on every component on every board.

been on to bush website it says go to settings on the tv via the home button go to channel scan unplug he aerial and it will say no channels found then plug aerial back in and do the scan again hopefully this should work

There are a few things you can attempt to fix your Bush VL19HDLED TV if it is showing a poor image: Verify the picture settings: Inappropriate picture settings could be the root of the undesirable picture effect. Verify that the picture mode is set to "Standard" or "Normal" in the TV's settings menu. Furthermore, make sure "Picture Invert" and "Negative Picture" are off by checking the options. Try resetting the TV to its factory preset settings. You must consult the user handbook to accomplish this because different models reset in various ways. Verify the connections. Verify that every wire leading from your TV to any connected external devices (such a cable box, DVD player, or game console) is securely fastened and operating as intended. Contact a repairman: If none of the aforementioned fixes work, there might be a hardware problem with the TV. In this case, it may be necessary to contact a repair technician for further assistance. The Bush VL19HDLED TV is a rather ancient model, thus it could be challenging to get replacement parts or help for repairs. It can be more cost-effective to replace the TV if troubleshooting is unsuccessful in fixing the problem.

It is possible that the VCR has frozen up or is stuck in an infinite loop. First, try unplugging the unit and letting it sit for several minutes. This may reset the unit and allow it to start working again. If that fails, then really you will need to take it to someone to repair.