Bush 42" LCD TV 1920x1080, 50 Hz, Freeview HD, HDTV, LED Backlight, 3D - Answered Questions & Fixed issues
My screen has gone two tone how do I get it back to normal
Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences to the author of that site.
How can i make it produce speaker sound and head phone sound ?
Check whether the audio is muted by accidental press at remote control button. Enter its sound menu, and check it. If muted, as you know there will be no audio output. If not muted, check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
Theres no sound have tried everything i can think of but no joy
if it is not connected to a soung system that might be at fault reset it to factory default through the settings menus available on the remote and see if that makes a difference. If it only works via a remote control ensure the remote is functioning .
If you reset successfully and thereis still no sound, (and the cause is not a sound system or such,) vthen you probably need the services of a technician. No doubt , even in todays modern tvs, the sound output can go independently of the video output.
Bush Smart Television. Lost WiFi on it?
Question edited for clarity.
Question moved from Smart Computers to Bush Television.
No, if is worked before, you don't need a booster. It is a software glitch or a WiFi setting that is incorrect.
Factory Reset the television. Re-enter the WiFi settings, (SSID and Password), and then do any Software Updates.
Google
bush (model) factory reset
All questions need 'make model (what is is)' as first 3 words please.
..
How do I correct a negative picture on my Bush TV
There are a few things you can attempt to fix your Bush VL19HDLED TV if it is showing a poor image:
Verify the picture settings: Inappropriate picture settings could be the root of the undesirable picture effect.
Verify that the picture mode is set to "Standard" or "Normal" in the TV's settings menu.
Furthermore, make sure "Picture Invert" and "Negative Picture" are off by checking the options.
Try resetting the TV to its factory preset settings.
You must consult the user handbook to accomplish this because different models reset in various ways.
Verify the connections.
Verify that every wire leading from your TV to any connected external devices (such a cable box, DVD player, or game console) is securely fastened and operating as intended.
Contact a repairman:
If none of the aforementioned fixes work, there might be a hardware problem with the TV.
In this case, it may be necessary to contact a repair technician for further assistance.
The Bush VL19HDLED TV is a rather ancient model, thus it could be challenging to get replacement parts or help for repairs.
It can be more cost-effective to replace the TV if troubleshooting is unsuccessful in fixing the problem.
Not finding what you are looking for?