20 Most Recent
JVC AV-20220 TV - Page 2 Questions & Answers
I have auto programmed the television, but it only
My personal guess would be that there is no signal coming through to your tv or the wrong signal coming through. I have the opposite problem...we get picture (snowy) but no sound except that of snow and the Audio/Sound options are NOT helpful.
Wish I could be of better help.
Possible power surge earlier today. TV will not
If your TV was plugged into a power strip with a surge arrestor, the power strip may need a reset (if there is a reset button) or replacement (those surge arrestors are only good for so many "hits". Try plugging the TV in elsewhere.
If it was not plugged into a surge suppressor, it is time to call a repairman.
JVC AV 3151s
I know this is a pretty old post, but maybe you'll see this. Here is a link to the manual on JVC's site:
http://resources.jvc.com/Resources/00/00/99/LCT0305-001B-A.pdf
JVC AV-27CM3
There is no specific "remote code" as such for a TV. A universal remote control will come with a set of codes for you to try, and the control manufacturer makes up these codes. If none of the listed codes work for a particular brand, the remote normally will have a code-search feature so you can hunt for the one you need. If the trouble is that you have a universal remote and no instruction sheet, you can try to find it online, or just buy a new control. They are inexpensive.
Remove CC Black Box without original remote?
It can be done with the front panel buttons. Here's a link to the user manual from JVC's site. It's covered in the book.
http://resources.jvc.com/Resources/00/00/99/LCT0305-001B-A.pdf
We have a JVC 20220
You have the closed-captioning turned on and set for "text" mode. If you turn it off the problem will go away. You can use the remote control or front panel buttons.
If you've lost your manual, you can find it here on JVC's site:
http://resources.jvc.com/Resources/00/00/99/LCT0305-001B-A.pdf
On timer light flashing
first you need to re soldered your tv, coz 50% problem of tv is lose connection, but be careful of short circuit,if nothing happen check the horizontal output transistor,
Not finding what you are looking for?