20 Most Recent Zebex ZBA Z-3051HS Barcode Scanner - P/N ZB3051USB Handheld Barcode Scanner Questions & Answers

you can try contacting the customer support for this issue

It's better you read the manual, follow this link: http://www.zebex.com/product/documents/Z-3151HS/Z-3151HS_UsersManual.pdf Page 8 advises about the sound/beep indicators. Success

Hello. The problem will get resolved by going on the links below and download the driver for your Z-3051HS Barcode Scanner.

LINK 1 (Auto Sensor Standard Firmware Version 1.10)
LINK 2 (Standard Firmware Version 1.10)

The links above belongs to ZEBEX official website.
Easily save the file to your computer. Run and install it properly.

I hope I helped!

If you have any other questions, please leave a reply.

Thank you for using FixYa!

If you look in the manual, you will see the code to place the scanner in to "stand" mode which should do as you request. This mode is restricted to certain models however. Near as I can tell, there are a few variants of the Z-3051HS model that support this. Reference the manual at the link below. Please update this with any other questions you may have.

Thanks,
Dan

Link: http://www.zebex.com.tw/old_website/documents/users_manual/handheld/z_3051hs.pdf

thats archived now. they all work the same way just download for example any current 2D handheld eg z-3152 software(2D handheld scanner) 3152 Series ZEBEX Leading 2D Barcode Scanners Solution Provider

http://www.zebex.com/supports_services/technical_download.sbu.htm#

Click below for a link to the support site. Click on the User's manual for you model scanner.

Zebex Manuals

Hope this helps.

Zeppelinx12