20 Most Recent Quasar VV-2002 20 in. TV/VCR Combo - Page 3 Questions & Answers

If I am not mistaking this is the same set as the panasonic PV-c2020. I attached an owners manual link here this should help you. Good Luck. http://service.us.panasonic.com/OPERMANPDF/PVC2020.pdf

try code 021 or 125

Quasar tv/vcr 0374 0381 0035 0162

These are the only ones I found for the combo's

try panasonic codes
for me one of the high numbers worked, 1248

Sounds like you need to go to the main menu and run the automatic channel selector again. It will take note note of which channels are not in use and then skip over them when you use the channel advance. Use your remote to get into the main menu and select the "TV" submenu. Then run the auto channel select. After that's done, you can also manually choose to skip channels you don't like. I believe the channel numbers appear in green if they're to be included, and yellow if they're to be skipped. Even if a channel is skipped, you should be able to get to it anytime by punching in the number on your remote.

Most everyone I know had problems with the tv/vcr combo including myself. I'll never buy one again. I'm sorry you are having the same problem.

You could have a electrical short in the picture tube or a short in the circuit leading to two of the three color guns.

can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you [email protected]

hello, i had the same problem for a long time and it drove me crazy, all that has to be done is hold the play/repeat button for like 8 seconds

same problem as discribed on a Quasar sp2722 0000 didnot unlock the parental control

thanks

you can fix this if you are very careful. it is call a high voltage leak. inside of the tv, close to where the power comes in will be what is called a high voltage transformer. if you are electrically inclined, unplug the tv, take the back off and then hook the power line up and turn the tv on. with the lights off in the room and a flashlight handy, look at where the sound is coming from. locate where the sound is coming from and look very carefully(very carefull not to touch with your hands or head to any part) for a white-ish blue arc of electricity. if you can see this then that is where the problem is. to fix it you will need to put something in between the two places that it is arcing from. a piece of plastic or silicon putty or anything non-conductive will work. again, be very careful or you might get the dogsnot shocked out you.

that's the one of the closed caption options in the tv set. on your remote control there should be a button labeled "cctv", cycle through the options untill you find the off mode. this could also be in the tv menu.

try pressing the record and play button simultaneously

is it for the tv or the vcr ?

Check first 0000, 0374 0381 0162 0035
need to know which remote your using?

for tv only try 003,054, 070 for vcr try 021,022,125

global electronics -mississauga