My printer does not print unless I turn it off then turn it back on. It will then print only (1) thing. For each page I print, I have to first turn it off and turn it back on. I have a Samsung CLP-325W Color Laser Printer.
Paper jams. I have one of these printers. Do not over fill the paper tray. Make sure the paper path is clear (See owners manual). Make sure the paper is relatively dust free and give the paper a good shake or shuffle before adding to the tray.
You did not mention if the paper was just not picking up or if it was stuck in the printer?
From You Tube:http://www.youtube.com/watch?v=5fJHykzkfwwDIY video tutorial on how to repair the Samsung CLP-315, CLP-301 laser printer "paper jam" problem, where the paper stops printing about halfway through for no apparent reason. My printer worked great otherwise, but was out of warranty. It would have been less expensive to get a new printer.The problem is a very cheap sensor.This repair takes 15 minutes and is inexpensive. Read the comments below.I got the part from SamsungParts.com. Search for part #0604-001393thanks :)
The manual doesn't specifically state this but it appears that if the printer is connected to a wired LAN connection the wireless function will be disabled if the printer is set up in infrastructure mode. When I tried this the 'wireless' light turned off and I wasn't able to find the printer's WiFi SSID using a nearby netbook. If your goal, like mine, was to disable the printer's WiFi from transmitting to reduce extra WiFi noise then this seems to work. One of the wireless troubleshooting tips in the manual states to disconnect the wired connection before attempting to set up a wireless connection so it appears the two can't be used simultaneously. It seems odd that there's no specific "off" setting for wireless though. The printer will provide a WiFi connection when also connected to a wired LAN port if it is set up as part of an ad-hoc wireless network so make sure you set it to 'infrastructure' mode to disable WiFi.
Make shure you use paper that is within thickness limit for you printer. Second, you should turn your printer upside down and shake it gently, to make shure there is no obsticals inside. If nothing of this helps, you should try to clean the feed wheels gently, as dirt can cause paper jam, or make the wheels stop spinning.
