20 Most Recent HP Mini 1000 Netbook - Page 8 Questions & Answers

install driver first

Go to control panel then click on internet options after the internet options window opens click on the advance tab then look at the bottom you will see reset. Click on reset then try to launch the IE again.

Reboot, then if responsive right click on desktop graphic options> rotate. If unresponsive still boot to safemode.

pls contact service center

Remove the cmos battery for 5 - 10 minutes. That will reset all data in the bios.

POWER SUPPLY & BATTERY PROBLEM If the laptop battery is more than 3 - 4 years old then the battery could be worn out. Rechargeable batteries have a finite number of charge and discharge cycles and will lose their charge capacity over time, i.e. won't charge to 100% and gradually the charge reduces until the battery won't charge up at all. OR The battery shows a 100% charge but when the adapter is disconnected the battery drops off to zero capacity in a very short time. If the battery drops to an unacceptable charge level then the battery needs to be replaced. When you connect the power adapter into the laptop, does the power LED light up? If not then - The battery adapter or the adapter's power lead or the laptop's power socket could be faulty. Check power adapter's DC plug that connects into the laptop power socket with a multi-meter, the voltage should be slightly higher than the voltage that is printed on the label on the bottom of the adapter. If the voltage is zero or way below the voltage that is printed on the label then the power adapter is faulty and needs to be replaced. If the adapter is OK then connect it to the laptop and power it up, then look at the power/battery charging LED light and wriggle the power plug in the laptop's power socket. If the power/battery LED light flashes and in a certain position this LED light stays firm, then the power socket is either faulty or it has a dry solder joint where it is connected to the motherboard. This can be repaired but it requires the laptop to be completely dismantled to get at this power socket and repair. If you cannot DIY then I suggest you get a quote first.

When you connect the power adapter into the laptop, does the power LED light up? If not then - The battery adapter or the adapter's power lead or the laptop's power socket could be faulty. Check power adapter's DC plug that connects into the laptop power socket with a multi-meter, the voltage should be slightly higher than the voltage that is printed on the label on the bottom of the adapter. If the voltage is zero or way below the voltage that is printed on the label then the power adapter is faulty and needs to be replaced. If the adapter is OK then connect it to the laptop and power it up, then look at the power/battery charging LED light and wriggle the power plug in the laptop's power socket. If the power/battery LED light flashes and in a certain position this LED light stays firm, then the power socket is either faulty or it has a dry solder joint where it is connected to the motherboard. This can be repaired but it requires the laptop to be completely dismantled to get at this power socket and repair. If you cannot DIY then I suggest you get a quote first.

how much would i pay for a change of keyboard f ever it doesn't really works? please send me answer on my email. i really need this to fix. i just borrowed this mini notebook. or any other options to fix it manually by my self? my backspace doesn't work. send me answers on my email please. [email protected]

Give this a try you probably have a virus..Download The following iso listed below. It is the latest version of the Kaspersky rescue disk. You need to burn it to a CD with a program like Imgburn (Which is also FREE like the iso file). Then you need to boot from the CD and run the scanner. It should fix you right up.Kaspersky rescue cd download:http://majorgeeks.com/downloadget.php?id=6501&file=1&evp=ef4247319d4b536cb88b74d1ae4842b0Imgburn download:http://majorgeeks.com/downloadget.php?id=4870&file=15&evp=0636b68877cb69b15faa3374cb1dcd89

turn brightness up ?

It depends on what file gave the checksum error. You need to copy that file to overwrite the one that gave the checksum error.

Press shift 3 times. I think you may have started sticky keys

It may be a connection problem.You can reset the modem and then you can check ip-address using Ip-Details.com IP-Details.com, Search and find ip address's,domain name host's whois information including city, country, global latitude & longitude coordinates.

SOLVED!!!I have fixed my issue!!!! Open the the monitor using a screw driver, (no screw closed in pressure) take out the from plastic, remove the 6 dark screw in order to disassemble the lcd from the back cover (pay attention to the camera cable)In the back of the the LCD unit there is the inverter unit embedded on top of the LCD unit, there it written (DON'T TOUCH) it is covered by a transparent plastic. On this transparent plastic there is a smal squared recut that can be pulled up. having the PC turned on turn this screw until the the image come back to the normal color.I have tested it and it worked fine on my netbook, I will not be responsable for any damage caused to your PC. Do it under your responsibility, I did it and it worked fine.In my case the laptop was left on the BUS and it got a lot of vibration, I guess that was the reason why that screw lost its original positionThanksCheersFabio

i think you want to bring it to the notebook center,it's strongly recommended because notebooks LCD is a bit fragile

if its internet explorer you should be able to right click on the toolbar or on one of them and a menu should pop up with a toolbar list on it, just uncheck the ones you don't want. some may ask you questions to deactivate

go to task manager and close that windows/programs by end program button , no need to restart!!

Try without the battery in and just with power supply, try the opposite. If still not working take to place of purchase.Laptop motherboards are not serviceable by normal home users.

You need to buy it to get the key.

HI HOPE THIS HELPSThe cause of this problem may be the failure of a hardware component, or an error in the instruction being sent from the BIOS to a hardware component.DO THIS FIRST - Perform a hard resetIf a PC suddenly fails to boot properly, you should perform a hard reset as the first procedure.

1. Disconnect all peripheral devices and remove all USB devices and media cards. You want to test the computer not the accessories!
2. Disconnect the AC power adapter, remove the battery, and then press and hold the power button for at least 15 seconds .
3. Reconnect the AC power adapter (but do not connect the battery), Press the Power button,Look for glowing LEDs near caps lock and num lock keys, and Listen for sounds of a disk drive and fan turning.