Top 20 Tag Heuer 2000 Aquaracer WAB2011.BA0803 Wrist Watch Questions & Answers

Hold right bottom button and then press right top button, while looking at tge watch face, this will toggle a little AL display indicator over the minutes digit

Just replaced a women's Aquaracer battery. It's a 364. Get the SR (silver oxide type) as it will last longer.

you can just subtract 12 hrs from the actual time then you get the regular time. :)

mcdevito75 here, Online from search on your home page, simply type in the name of your watch plus.com most watch manufactureres have a web site.

I have the same problem with mine....They have some kind of manufacturer malfunction , tag will not admit. My is in the shop for the 3rd time ...at this point they should replace my watch...this one is a lemon.

mcdevito75 here, Tissot a very, very great name and watch, a you know most stems pull out to set the time, some watches have a screw down crown this adds to it"s waterproofing as there is a gasket under the crown. Maybe your Tissot has this screw down crown, simply un screw the crown then gently pull up on the crown to set the time. If this fails, see any Jewler for help, doN't mess with the watch to much a syou or anyone could wreck it, and Tissot is very expensive.

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to TAG HEUER watch manuals.Rate me, please..

press the mode button 3 times and it will be on time setting press restart until the hours are blinking then hold the start button til it says am or pm

Check out the manufacturers web site, some manufactureres have users manuals for their watches which can be downloaded. You may be lucky. You could also try some of the various manuals websites. They have manuals for all manor of things. Good Luck

PDF Manuals at Normal 0 0 1 2 14 1 1 17 11.1282 0 0 0 www.tagheuer.com
Do a search for Tag Heurer manuals

Here is the manual from GAP customer service.

Dear gap.com Customer,
Thank you for your email regarding the Sporty Printed Watch user
instructions. Please accept our apologies that no directions were
received with your order.
The instructions are as follows:
Button Functions:
A. Light
B. Mode
C. Start
D. Reset
Standard Time Adjustment:
1. To set the time, press the Mode button three times (The seconds and
the word Tuesday should start flashing).
2. If the seconds position shows less than 30 seconds, pressing the
Start button will reset the seconds to 00. If the seconds position shows
more than 30 seconds, pressing the Start button will reset the seconds
to 00 and the minutes will increase by 1.
3. Press the Reset button until the area you want to change starts
flashing (i.e., second, minute, hour, day, month, and weekend. Press
Start button once for per unit increment, press and hold for 3 seconds
for speedy advance.
4. At completion, press Mode button to resume standard time display.
To reset the Alarm:
Press the B: Mode button until you reach the alarm.
Press the D: Restart button.
Press the C: Restart button to get back to the time

If it a scratch on a brushed surface try one of these watch Brush pens
Here only a couple bucks

If it is on a polished surface

try a cape cod cloth here

both are indispensable watch collectors items.

I would strongly suggest you to take the watch to respectable watch store,and have it decondensated and have them install a new waterproof tight gascet.

Some TAG models have a date "quick set". Pull crown out just a wee bit to position #1. Turn counter clockwise to advance date. Pulling out the crown to position #2 stops the watch and sets the time.

send in for repair to a watchsmith

we wouldnt know

You probably have a screw down crown. Turn the crown counterclockwise and unscrew the crown. Now you should be able to pull it out. When tightening it back down, don't over tighten, just snug. This is to keep moisture out of your watch. Always have it screwed down unless you are setting the watch.

Contact manufacturer they will help. :-)

why not just take to a watch/jewellery store and get battery changed