2004 Yamaha V Star Classic "adjusting clutch push rod primary" Questions

...clutch hub. On the outside of the hub there is an 12mm nut locking down a 6mm adjusting screw, the screw is adcually the first source of adjustment on initial assembly. Let me give you the breakdown ...

...clutch lever using adjusting nuts under rubber boot on clutch cable remove derby cover on primary cover use allen wrench to hold push rod while loosing lock nut turn allen wrench clock wise on push ...

...See the big cover with 5 screws directly under the seat? That accesses the clutch push rod adjustment, and oil can be added through

...it just "touch" the push rod behind it. Back off the screw 1/4 to 1/2, hold it from turning, and lock down the lock nut. Adjust the clutch cable so there's about 1/16" to 1/8" slack at the lever

clutch and plates on my 97 Kawasaki lakota 300. when i start the atv and put into gear it wants to take off (move) i have adjusted the adjustment screw both ways. it is either taking off or not moving

...clutch push rod (under the primary cover's "Derby cover) needs adjustment, followed by the clutch cable. As far as the leak where the cable enters the transmission, there is an "o-ring" seal that ...

...clutch release balls are seated in the ramps. THEN back off the adjusting screw one half to one full turn. THEN holding the Allen key and adjusting screw so neither can move anymore tighten the ...