PB Blaster inside, then let it set like that for a few days....then try to kick syart without having the ignition on...if it starts turning....then replace fresh plugs and you'll probably needs to
Question about Motorcycles
...PB Blaster to break it free and the WD40 to aid in wicking around the rings (which is what is really stuck) into the spark plug hole.. and put the plug back in.. wait 24 hrs.. try to kick it,, if not ...
...pb blaster and run it trough your spak plug hole moving piston slowly to remove surfuse rust ,reeds and carb then drain carb you may have to turn the bike upside down and kick start it to get the ...
how to get rid of the rust of the garden tools best bet would be pb-blaster avail at walmart and most auto parts stores, this stuff is bad to the bone and will eat rust like crazy
Question about Yamaha Motorcycles
Mike,.if its corrosion.. PB Blaster will free it up.. make sure the motor is trimmed so the spray will run into the lever shaft area.. let it soak over night (at least).. try to keep it off the paint.
Question about Suzuki RM-Z 250 Motorcycles
...it down slightly then up to third and so on is it eazy to do my self i am mechanicly minded try putting some pb blaster around your shifter shaft or check to see if the shaft or shifter is ...
Question about Suzuki RM-Z 250 Motorcycles
..., the gas in the carb has turned to varnish and the jets are glogged up. Take them apart, clean with PB Blaster and carb cleaner. Then use an air gun to finish cleaning the jets and carb
...it will turn freely but not come out. You have to beat it out, if it does not come out easy it has rusted in place so spray anti rust like PB Blaster, and let it sit, beat it out with large
...PB Blaster and soak the bolt overnight. If that doesn't loosen it then heat the thread area (carefully) with a small propane torch. To prevent this from happening again you should as part of your ...
Question about Suzuki RM-Z 250 Motorcycles
...turns to the left pushed in also fine to lock forks. just cant turn to right to open seat. sounds like debris in lock try flushing lock out with WD40 or PB Blaster then try make sure no burrs on ...
96 questions posted
Usually answered in minutes!
67 Questions
0 Questions
2 Questions
1 Questions