Question about Harley Davidson FXDL Dyna Low Rider Motorcycles
...jackshaft loose from the starter. Disconnect the battery. Drain and remove the primary cover. Just above the clutch, you'll see the jackshaft. Remove the small bolt and remove the jackshaft. When ...
starter jackshaft. You don't necessarily have to remove the starter gear and the jackshaft but you may be able to work it out without moving the clutch assembly out. If you want to move the clutch
...to loosen the oil tank mounts to provide clearance for starter removal... Install new starter in reverse order...Torque specs... Starter mounting bolts - 13 - 30 ft-lbs Jackshaft bolt - 7 - 9 ...
starter jackshaft. You don't necessarily have to remove the starter gear and the jackshaft but you may be able to work it out without moving the clutch assembly out. If you want to move the clutch
...starter to the jackshaft. If this coupling is stripped out, it will allow the starter shaft to spin inside the coupling while the jackshaft remains still unscrewing the bolt. Otherwise, I'd put a new ...
...starter jackshaft. You don't necessarily have to remove the starter gear and the jackshaft but you may be able to work the gear out without moving the clutch assembly out. If you want to move the ...
Question about Harley Davidson FXDL Dyna Low Rider Motorcycles
starter jackshaft on. See if you can work the jackshaft out, some of them you can get out others you can't. If you can't get the jackshaft out, you'll have to remove the snap ring in the center of the
...starter jackshaft. Then, on the other side of the bike, you'll probably have to remove at least some of the exhaust system so you can get the starter off. Take the battery cable off the starter ...
127 questions posted
Usually answered in minutes!
96 Questions
87 Questions
94 Questions
20 Questions
16 Questions