Behringer Pmp3000 16 Channel Audio Mixer "igbt transistor" Questions

Ad

...which is better to replace the transistor or the power board? Try this site: http://parts.digikey.com/1/parts/1015239-igbt-w-diode-600v-75a-to247ac-irgp50b60pd1pbf.html This is an apparent

Ad

...replaced after initial failure this results in more damage. For the power supply, typically the two IGBT's are wiped out and the four transistors driving them as well as the regulator chip and one or ...

Ad

... The SPS1000 supply takes out about $25 of parts when they go. The hardest parts to replace are the IGBT transistors as the heat sinks are hard to remove to get the screws out of the transistors. All ...

Question about Behringer Music

1 Answer

...IGBT's and one other surface mounted transistor and usually a diode. If a fuse has been repalced, then often a pair of power resistors associated with softstart are blown. A lot of labor is necessary ...

Question about Behringer Music

1 Answer

...- D6 and D9 are short - TOP221 ? ) Best Regards Safak from TURKEY Oh yeah... know them well The IGBT transistors fail, the sand coated resistors blow open... replace as a pair. The driver ...

IGBT's is especially tough. All solder must be removed from the transistor leads AND the thermistor on one of the heat sinks. Once you have verified the leads are loose, one has to rock the heat sinks

Question about Behringer Music

1 Answer

...have it serviced... The sensorsare on both the power amp heat sinks and the one sink for one of the IGBT main switchers in the power supply... The problem, if there is one is likely with the ...

...IGBT's are usually blown including the four driver traansistors and the switching regulator chip and another small surface mounted transistor and one or both speedup surface mounted 1N4148's. IF THE ...

Question about Behringer Music

1 Answer

...in the subject. The supply when it fails takes out eleven components including two expensive IGBT transistors. If the rearmost amp fried, add at least four more components and a lot of work ...

Question about Behringer Music

1 Answer

...burning my component, I need trasistor M50D060 s thank you You have bigger problems than just the IGBT. I replace that part with part number: APT28GA60BD15 About $6.50 from Digikey.com You will ...

Not finding what you are looking for?
Behringer Pmp3000 16 Channel Audio Mixer Logo

215 questions posted

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...