2002 Subaru Outback "vibration stop" Questions

...stop the vibration is bad but if you put it in neutral or park then back into drive the vibration is not as bad Did you recently replace the axles on the vehicle? This problem commonly occurs in ...

...are stopped at a stop sign and still in gear.  The vibration usually goes away when you put it in neutral or park.  In my case, I even thought I detected some strange vibration when

stop sign foot on brake pedal engine makes cavitating noise and feel the vibration in brake pedal and floor board. help? If I understand you correctly, you feel a vibration it the brake pedal when you

vibration problem When stopped with foot on brake and car in gear, I get achattering or a vibration. I replaced the motor mounts, had all new bushings front and rear, any ideas? Somtimes if you turn ...

...for their to be a vibration when in drive . It runs fine it just when your at an idle when at a stop. Hi no there shouldnt be any vibration at all id say something is not tightened or aligned ...

2000 subaru outback/ clunk when i put it in reverse I have a 2000 subura legacy/outback. When i put it in reverse it makes a loud clunk noise. Sometimes it does not make the noise initially, but as i ...

Vibration in steering wheel that will disappear after slowing down and then accelerating in 2002 Subaru outback After stopping as I accelerate back to 60 mph vibration begins to occur being felt in ...

In 05 H6 PREMIMUM when the brakes are applied at 10 km/hr or less the ABS vibrates or zinngs.Had senser replaced but same.ABS light comes on and it stops but the light goes off and back to square one.

I have a 2000 Subaru legacy outback wagon. I can drive it around town at speeds up to 45 MPH with no problems. Today, I got on the freeway and set the cruise control at 60 MPH. After 4 minutes at that

...while driving or at a stop. A vibration while driving is usually out of balance tires and a vibration while stopping is usually warped rotors. Vibrating while stopped means the idle is probably