2001 Subaru Outback "cylinder" Questions

I am trying to install a new lift gate support cylinder on the hatchback of an '02 outback. I cannot get the new cylinder to compress at all. Is there some way to get the brand new cylinder to ...

2007 Subaru Outback lock cylinder mutilated In a failed robbery attempt, some thieves totally mutilated the lock cylinder on my 2007 Subaru Outback. It hasn't been a big deal since I use the keyless ...

cant find clutch master cylinder Subaru outback impreza sport 1997. On most cars the clutch master cylinder is generally mounted to the firewall next to the brake master cylinder, HOWEVER quite a ...

...and i checked it again and it still says cam shaft sen sor please help me Do you have the four cylinder or the six cylinder? The six cylinder has 2 camshaft sensors - one for each camshaft. If ...

...The I have a 1997 Subaru Legacy Outback AWD. The check Engine light is on and is coming back as a cylinder 1 misfire. I've replaced the wires, plugs, coil & even the injector. Compression is ...

position and the travel of the piston will hit and bend them. A good way of testing this is to do a cylinder compression test after the timing belt is put back on. The pressure in each cylinder should

...it has water in it. Possibly, do a compression check. If you have greater compression on 1 or more cylinders you may have a bad head gasket or a Cracked head or a Cracked Cylinder wall. The first

#3 cylinder miss in a 1997 subaru outback 2.5 liter coil pack, wires are good. #3 plug can be heard firing through the exaust at idle. timing? lifter shims? sloppy timing belt? Do a cylinder ...

...luck sounds like a worn key or pins in the ignition switch. problem most likely with worn ignition cylinder or a worn key. sometimes u can get lucky by using a couple diffrent products. first get a ...

clutch pedal periodically does not return to normal height ..advised probable clutch master cylinder needs replacement..could it simply be hose? what is proper procedure to replace clutch master ...