2005 Lexus LS400 "cost put wheel barrings" Questions

...cost The diagram should be under the hood. If you have a 3/8" socket breaker bar you connect it to the tensioner turn it to release the tension on the belt. The tensioner will want to spring back and ...

...cost much to buy and its best to replace both sides, you will need some special tools such as ball joint splitter and a workshop manual would be helpful if you have never done this before and you are ...

cost to repair until it is put on a rack and inspected. Obviously there is damage as it does not drive straight. I would suspect you have bent tie rod, or sway bar. You may even have a bent wheel. You

...cost I may be looking at You didn't say what make or model or year, but This could be so many things. Bad ball joints, bad control arm, bad struts, strut plates, bad CV joint, bad inner tie rod, bad ...

...cost to replace and it is still a deal item them support the engine with a bar and chain jack up the car put it on jack stands far enough back that it is not on the frame loosen steering knuckle also ...

...cost alot more than what you should pay to have the axels changed. I charge $100 to change both axels and $75 to change just one. I buy the rebuilt axels at my local auto parts store for $46 or new ...

put the vehicle on an alignment machine. This will expose any furthur bent suspension parts, such as lower control arms.15 years ago it cost me $1200 to fix a car after doing a similar thing, mine was

...cost about 21.00. kit is just a half dozen small parts. replace old parts with new and put everything back in place and you're done. very easy and I'm a dummy. DISCONNECT GROUND WIRE FROM BATTERY ...

...put's more preasure on the side going slowest inside wheel when turning the corner. I had a problem like this before and it was bearings in the diff so all I can advise is start with checking the ...

put the car in neutral? Are there any issues with towing this car, i.e. overheating the transmission? Thanks, BJ Hi, you should rent a tow dolly from U-Haul. Pulling with a tow bar in neutral that far